本文开发以交流电源供电的两平行碳纤维导线构成的直线型传感器.使用该传感器对树脂流动前锋沿着传感器方向的变化作连续监测,充模过程结束后继续监测固化过程.实验研究不同的树脂种类、不同的温度、不同的促进剂固化剂比例、不同的电极间距对监测效果的影响.
参考文献
| [1] | Devillard M.;Hsiao KT.;Gokce A.;Advani SG. .On-line characterization of bulk permeability and race-tracking during the filling stage in resin transfer molding process[J].Journal of Composite Materials,2003(17):1525-1541. |
| [2] | Sylvia R.M. Kueh;Richard S. Parnas;Suresh G. Advani .A methodology for using long-period gratings and mold-filling simulations to minimize the intrusiveness of flow sensors in liquid composite molding[J].Composites science and technology,2002(2):311-327. |
| [3] | Schmachtenberg E;zur Heide JS;Topker J .Application of ultrasonics for the process control of Resin Transfer Moulding (RTM)[J].Polymer Testing,2005(3):330-338. |
| [4] | C. William Lee;Brian P. Rice;Matthew Buczek;Dave Mason .Resin Transfer Process Monitoring and Control[J].SAMPE Journal,1998(6):48-55. |
| [5] | Jeffrey M Lawrence et al.Use of sensors and actuators to address flow disturbances during the resin transfer molding process[J].Polymer Composites,2003,24(02):237-247. |
| [6] | Nitesh C Jadhav et al.Assessment of flow and cure monitoring using direct current and alternating current sensing in vaccum-assisted resin transfer molding[J].Smart Materials and Structures,2000,9(06):727-736. |
| [7] | T. Luthy;P. Ermanni .Linear direct current sensing system for flow monitoring in Liquid Composite Moulding[J].Composites, Part A. Applied science and manufacturing,2002(3):385-397. |
| [8] | Alexandros A Skordos et al.A dielectric sensor for measuring flow in resin transfer moulding[J].Measurement Science and Technology,2000,11:25-31. |
| [9] | Anne Laurent-Mounier;Christophe Binetruy;Patricia Krawczak .Multipurpose Carbon Fiber Sensor Design for Analysis and Monitoring of the Resin Transfer Molding of Polymer Composites[J].Polymer Composites,2005(5):717-730. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%