欢迎登录材料期刊网

材料期刊网

高级检索

对于2×2斜纹玻璃纤维织物/环氧层合板螺栓连接,实验研究了几何参数对其连接性能的影响.选取不同端距和边距,测试玻璃纤维织物复合材料层合板W/D(试样宽度/孔直径)及E/D(孔端距/孔直径)对螺栓连接强度的影响,并分析螺栓连接的破坏模式.实验结果表明,玻璃纤维织物/环氧复合材料层合板螺栓连接承载能力随着边距E和端距W的增加而增加.当E/D=3,W/D=4 时,螺栓连接强度达到稳定值.

参考文献

[1] 贾普荣;矫桂琼.复合材料层压板挤压强度[J].宇航材料工艺,1997(03):48-50.
[2] Buket Okutan;Zuleyha Aslan;Ramazan Karakuzu .A study of the effects of various geometric parameters on the failure strength of pin-loaded woven-glass-fiber reinforced epoxy laminate[J].Composites science and technology,2001(10):1491-1497.
[3] Yi Xiao;Takashi Ishikawa .Bearing strength and failure behavior of bolted composite joints (part I: Experimental investigation)[J].Composites science and technology,2005(7/8):1022-1031.
[4] Yi Xiao;Takashi Ishikawa .Bearing strength and failure behavior of bolted composite joints (part II: modeling and simulation)[J].Composites science and technology,2005(7/8):1032-1043.
[5] Taner Yylmaz;Tamer Synmazcelik .Investigation of load bearing performances of pin connected carbon/polyphenylene sulphide composites under static loading conditions[J].Materials & Design,2007(1):520-527.
[6] Alaattin Aktas,M;Husnu Dirikolu .An experimental and numerical investigation of strength characteristics of carbon-epoxy pinned-joint plates Composites[J].Science and Technology,2004,64:1605-1611.
[7] H.A. Whitworth;M. Othieno;O. Barton .Failure analysis of composite pin loaded joints[J].Composite Structures,2003(2):261-266.
[8] Alaattin Aktas,M;Husnu Dirikolu .The effect of stacking sequence of carbon epoxy composite laminates on pinned-joint strength[J].Computers and Structures,2003,62:107-111.
[9] Bulent Murat Icten;Onur Sayman .Failure analysis of pin-loaded aluminum-glass-epoxy sandwich composite plates[J].Composites science and technology,2003(5):727-737.
[10] 刘建超,王铁军,张炜.碳纤维织物/环氧复合材料销钉连接实验研究[J].材料工程,2005(07):51-54,63.
[11] Buket Okutan;Züleyha Aslan;Ramazan Karakuzu .A study of the effects of various geometric parameters on the failure strength of pin-loaded woven-glass-fiber reinforced epoxy laminate Composites[J].Science and Technology,2001,61:1491-1497.
[12] Mevlüt Tercan;Osman Asi .An experimental investigation of the bearing strength of weft-knitted 1×1 rib glass fiber composites[J].Composites Science and Technology,2005,56:635-636.
[13] J.Wang;A.Banbury;D.W.Kelly .Evaluation of approaches for determining design allowables for bolted joints in laminated composites[J].Computers and Structures,1998,4:167-176.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%