采用端羧基于腈橡胶(CTBN)对酚醛树脂进行改性,研究CTBN用量对改性酚醛树脂力学性能的影响.酚醛树脂的拉伸强度、断裂伸长率随CTBN用量的增大而呈上升趋势,当CTBN用量为10%时,拉伸强度、断裂伸长率达到最大值,并利用扫描电子显微镜(SEM)、傅立叶转换红外光谱(FTIR)和热重法(TGA)对改性前后酚醛树脂的结构和热性能进行分析.结果表明,CTBN与酚醛树脂之间发生了化学反应,并且改性酚醛树脂的热性能有所下降.
参考文献
[1] | 黄发荣;焦杨声.酚醛树脂及其应用[M].北京:化学工业出版社,2003 |
[2] | 赵小玲,齐暑华,杨辉,张剑,杨贵忠.高性能化改性酚醛树脂的研究进展[J].工程塑料应用,2003(11):63-66. |
[3] | C.P.Reghunadhan Nair .Advances in addition-cure phenolic resins[J].Progress in Polymer Science,2004(5):401-498. |
[4] | Min Ho Choi;Ho Yun Byun;In Jae Chung .The effect of chain length of flexible diacid on morphology and mechanical property of modified phenolic resin[J].Polymer: The International Journal for the Science and Technology of Polymers,2002(16):4437-4444. |
[5] | 葛东彪,王书忠,胡福增.聚醚增韧酚醛树脂及其泡沫的研究[J].玻璃钢/复合材料,2003(06):22-27. |
[6] | R.L.BINDU;C.P.REGHUNADHAN NAIR;K.NH.NINAN .Addition-Cure-Type Phenolic Resin Based on Alder-ene Reaction: Synthesis and Laminate Composite Properties[J].Journal of Applied Polymer Science,2001(5):737-749. |
[7] | 伊廷会.酚醛树脂高性能化改性研究进展[J].热固性树脂,2001(04):29-33. |
[8] | Reghunadhan Nair CP;Bindu RL;Ninan KN .Phenolic resins bearing maleimide functions, synthesis and characterisation[J].Journal of Applied Polymer Science Part A:Polymer Chemistry,2000,38(02):641-652. |
[9] | 崔杰,沈时骏,刘长丰,王平华.NBR改性硼酚醛树脂的性能研究[J].橡胶工业,2005(05):288-290. |
[10] | Hartshorn S R.Structural Adhesive:Chemistry and Technology[M].New York:Plenum Press,1986:94-102. |
[11] | Knop A;Pilate L A.Phenolic resin:Chemistry,Application and Performance,Future Direction[J].Springer-Verlag,1985:148. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%