复合材料低成本制造工艺中,VARI是一种很重要的成型技术,本文对VARI的优点、难点、专用树脂体系、成型方法、树脂分配系统、树脂流动模拟及其国内外应用进行了综述.研究表明,VARI作为一种复合材料的低成本成型技术,已得到广泛应用,尤其是大尺寸、大厚度制件的制造.发展VARI工艺对于降低复合材料的制造成本、扩大复合材料的应用范围有很大作用.由于VARI常用于大尺寸结构件的制造,树脂充模过程的精确模拟对制品质量至关重要,目前国内对此研究仍停留在初级阶段,该方面研究需要引起重视.
参考文献
| [1] | 陈祥宝.先进树脂基复合材料的发展[J].航空工程与维修,1998(03):3-7. |
| [2] | 屈乃琴.先进复合材料的研究现状与应用[J].纤维复合材料,1995(01):45-54. |
| [3] | 赵渠森,赵攀峰.真空辅助成型工艺（VARI）研究[J].纤维复合材料,2002(01):42-46. |
| [4] | 赵渠森,赵攀峰.真空辅助成型技术（一）[J].高科技纤维与应用,2002(03):22-27. |
| [5] | 赵渠森,赵攀峰.真空辅助成型技术（三）[J].高科技纤维与应用,2002(05):25-27. |
| [6] | 李小兵,孙占红,曹正华.真空辅助成型技术及其配套基体树脂研究进展[J].热固性树脂,2006(05):39-43,53. |
| [7] | 盘毅,胡芸,宋威.二酚基甲烷的合成与表征[J].国防科技大学学报,2005(02):15-19. |
| [8] | 俞计华,盘毅,胡芸,时恩学.低粘度液态双酚F型环氧树脂的性能研究[J].热固性树脂,2001(04):1-2. |
| [9] | Sun XD.;Lee LJ.;Li SJ. .Mold filling analysis in vacuum-assisted resin transfer molding. Part I: SCRIMP based on a high-permeable medium[J].Polymer Composites,1998(6):807-817. |
| [10] | Ni J.;Sun XD.;Lee LJ.;Li SJ. .Mold filling analysis in vacuum-assisted resin transfer molding. Part II: SCRIMP based on grooves[J].Polymer Composites,1998(6):818-829. |
| [11] | R.Mathur;D.Heider;C.Hoffmann;J.W.Gillespie;S.G.Advani;B.K.Fink .Flow Front Measurements and Model Validation in the Vacuum Assisted Resin Transfer Molding Process[J].Polymer Composites,2001(4):477-490. |
| [12] | 祝颖丹,李新华,王继辉,高国强.高渗透介质型真空注射成型工艺的研究[J].复合材料学报,2003(04):136-140. |
| [13] | 邓京兰,祝颖丹,王继辉.SCRIMP成型工艺的研究[J].玻璃钢/复合材料,2001(05):40-43,32. |
| [14] | Rigas E J;Wanlah SM;William A S.Development of a novel processing technique for vacuum assisted resin transfer molding(VARTM)[A].,2001 |
| [15] | Hammami A;Gebart B R.Experimental investigation of the vacuum infusion process[A].,1998 |
| [16] | 李新华,祝颖丹,王继辉,高国强.沟槽型真空注射成型工艺的研究[J].复合材料学报,2003(04):111-116. |
| [17] | Francois Trochu;Edu Ruiz;Vincent Achim .Advanced numerical simulation of liquid composite molding for process analysis and optimization[J].Composites, Part A. Applied science and manufacturing,2006(6):890-902. |
| [18] | 赵渠森.先进复合材料手册[M].北京:机械工业出版社,2003:1413-1434. |
| [19] | Kang MK;Lee WI;Hahn HT .Analysis of vacuum bag resin transfer molding[J].Composites Part A:Applied Science and Manufacturing,2001,32:1553-1560. |
| [20] | Min Li;Charles L. Tucker III .Modeling and simulation of two-dimensional consolidation for thermoset matrix composites[J].Composites, Part A. Applied science and manufacturing,2002(6):877-892. |
| [21] | Gauvin R.;Trochu F. .Key issues in numerical simulation for liquid composite molding processes[J].Polymer Composites,1998(3):233-240. |
| [22] | Guyonvarch G;AudetM;Qian YY.Validation of non-isothermal resin transfer molding shrstlations[J].Joint Eur Con JEC,1996 |
| [23] | Lebrun G;Gauvin R .Heat transfer analysis in a heated mold during the impregnation phase of the resin transfer molding process[J].Journal of Materials Processing & Manufacturing Science,1995,4:81-104. |
| [24] | Bruschke MV;Advani SG .A numerical approach to model nonisothermal viscous flow through fibrous media with free surfaces[J].International Journal for Numerical Methods in Fluids,1994,19:575-603. |
| [25] | Ngo ND;Tamma KK .Non-isothermal 2D Flow/3D thermal developments encompassing process modeling of composites:flow/thermal/cure formulations and validations[J].International Journal for Numerical Methods in Engineering,2001,50:1559-1585. |
| [26] | Laurent Joubaud;Francois Trochu;Jerome Le Corvec .Analysis of Resin Flow Under Flexible Cover in Vacuum Assisted Resin Infusion (VARI)[J].Journal of advanced materials,2005(3):3-10. |
| [27] | Khattab;Ahmed;Sherif El-Gizawy A.Development of virtual flow model for process design in vacuum assisted resin infusion molding operations[A].,2005:1093-1097. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%