在分析热压罐工艺传热路径和传热方式的基础上,从热压罐温度场、框架式模具温度场和构件温度场三个层次讨论了国内外热压罐工艺温度场的研究情况,指出框架式模具温度场、壁板级构件温度场和盒段级构件温度场将是以后研究的重点.
参考文献
| [1] | BOEING.D6-49327,6-7[Q]. |
| [2] | S V Hoa H.Design and Manufacturing of Composites Hamada Concordia University Montreal[A]. |
| [3] | 大型热压罐装置[J].航空制造工程,1997,3:38-39. |
| [4] | Composite Molding Tools And Parts And Processes Of Forming Molding Tools Gniatczyk et al[P].United States Patent,US6309587 B1,2001-10-30. |
| [5] | Composite Airframe Structure Michael C.Y[M].Niu Conmilit Press LTD:134-135. |
| [6] | 赵渠森.热压罐成型工艺[M].北京:机械工业出版社 |
| [7] | 复合材料固化模技术[M].沈阳航空工业学院学校,1994:30-36. |
| [8] | A C Loss;G S Springer .Curing of Epoxy Matrix Compestes[J].Compos Mater,1983,17:135-169. |
| [9] | P R Ciriscioli;G S Springer.Smart autoclave Cure of Composites[M].USA:Technomie Publishing Company,Inc,1990:13. |
| [10] | P R Ciriseioli;Q Wang;G S Springer .Autoclave CuringComparisons of model and Test Results[J].Compos Mater,1992,26(01):90-102. |
| [11] | A O Kays .Exploratory Development on Processing Science of Thick Section Composites.[Technical Report AFWAL-TR-85-4090][R].Air Force Wright Aeronautical Laboratories,Wright Patterson AFB,OH,1985. |
| [12] | T E Twardowski;S E Lin;P H Cell .Curing in Thick Composite Laminates:Experiment and Simulation[J].Compos Mater,1993,27(03):215-250. |
| [13] | T A Bogetti;J W GiliespieJr .Two-dimensional Cure Simulation of Thick Thermosetting Composites[J].Compos Mater,1991,25:239-273. |
| [14] | T A Bogetti;J W GiliespieJr .Process-induced Stress and Deformation in Thick-section Thermoset Composite Laminate[J].Compes Mater,1992,26(05):625-660. |
| [15] | D D Shin .Intelligent Processing for Thick Composite[D].University of California,2000. |
| [16] | D C Blest;B R Duffy;S McKee;A.K.Zulkifle .Curing Simulation of Thcrmoset Composite Manufacturing[J].,1993,4(03):43-51. |
| [17] | Vincenza Antonucci;Michele Giordano;Sabato Inserra Imparato;Luigi Nicolais .Autoclave manufacturing of thick composites[J].Polymer Composites,2002(5):902-910. |
| [18] | S Yi;H Hilton;M F Abroad .A Finite Element Approach forCure Simulation of Thermosetting matrix Composites[J].Computers & Structures,1997,64(1-4):383-388. |
| [19] | J H Oh;D G Lee .Cure cycle for Thick Glase/Epoxy Composite Laminates[J].Compes Mater,2002,36(01):19-45. |
| [20] | S. Yi;H. H. Hilton .Effects of thermo-mechanical properties of composites on visosity, temperature and degree of cure in thick thermosetting composite laminates during curing process[J].Journal of Composite Materials,1998(7):600-622. |
| [21] | V Antonueci;M Giurdano;S Inserra;L.Nieolais.A new methodology for the active control of the heat transfer in autoclave technology[J].Elsevier ScienceB V,2000:295-300. |
| [22] | Z. L. Yang;S. Lee .OPTIMIZED CURING OF THICK SECTION COMPOSITE LAMINATES[J].Materials and Manufacturing Processes,2001(4):541-560. |
| [23] | 杨正林;陈浩然.层合板在固化过程中瞬态温度场及固化度的有限元分析[J].玻璃钢/复合材料,1997(03):3-7. |
| [24] | 陈浩然;杨正林;唐立民 .复合材料层合板固化过程的数值模拟[J].应用力学学报,1998,15(03):30-36. |
| [25] | 李辰砂 .复合材料成型工艺智能化的研究[D].哈尔滨:哈尔滨工业大学,1999. |
| [26] | 武湛君 .基于光纤传感技术的复合材料固化监测研究[D].哈尔滨工业大学,2001. |
| [27] | 郭战胜,杜善义,张博明,武湛君.厚截面树脂基复合材料的温度场研究Ⅰ：模拟[J].复合材料学报,2004(05):122-127. |
| [28] | 左德峰;朱金福;黄再兴 .树脂基复合材料固化过程中温度场的数值模拟[J].南京航空航天大学学报,1999,31(06):701-705. |
| [29] | 胡训传.复合材料弹翼结构热力力学分析[J].北京航空航天大学学报,1996(03):374. |
| [30] | 杨自春.复合材料层合结构的非线性传热分析[J].海军工程大学学报,2000(05):9-13. |
| [31] | 张纪奎,关志东,郦正能.热固性复合材料固化过程中温度场的三维有限元分析[J].复合材料学报,2006(02):175-179. |
| [32] | S R White;Y K Kim Staged .Curing of Composite Materials[J].Composites PartA,1996,27:219-227. |
| [33] | 白树成,王清海,刘梦媛,姜健,刘京林.大尺寸复合材料构件热压罐成型工艺温度场均匀性控制[C].第十四届全国复合材料学术会议论文集(下),2006:989-993. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%