本文介绍了硅橡胶模具的制作方法,探讨了硫化时间与固化剂用量对硅橡胶硫化程度的影响,解释了硫化程度与硅橡胶模具寿命之间的关系;探讨了硅橡胶在几种不同材质表面的脱模性;探讨了模具制作过程中固化剂和硅油用量对模具质量的影响,并给出了适宜的固化荆用量;探讨了稀释剂用量与种类对硅橡胶模具质量的影响,并指出二甲基硅油是合适的稀释剂;探讨了硅橡胶模具发生膨胀的原因,指出其膨胀的本质是溶剂对硅橡胶的溶胀,并给出了减小溶胀的应对措施.
The preparing method of silicone rubber mould was introduced,the effect of temperature and time on degree of vulcanization was discussed,the relationship between life of silicone rubber mould and degree of vulcanization was also explmned.The paper discussed the demoulding properties on varied material and the effect of the ratio of solidify agent and silicone oil on mould quality,gave the proper ratio of solidify agent.The most suitable thinner might was silicone oil,other thinner minght cause the contraction of mould.The reason of expansion of mould was swelling caused by solvent,the method of reducing such expansion was given.
参考文献
[1] | 李光亮.有机硅高分子化学[M].北京:科学出版社,1998:147. |
[2] | 张明龙,曾竟成,梁济丰,肖加余.气囊辅助RTM工艺用复合裙模具的设计与制备[J].玻璃钢/复合材料,2007(02):45-47. |
[3] | 刘钧,尹昌平,曾竟成.软模辅助RTM制备舱段缩比件[J].玻璃钢/复合材料,2006(01):45-47. |
[4] | 彭超义,曾竟成,肖加余,杜刚.基于柔性模辅助RTM技术的整体推力结构的分析与设计[J].玻璃钢/复合材料,2006(03):28-30,27. |
[5] | 刘大华.合成橡胶工业手册[M].北京:化学工业出版社,1991:115. |
[6] | 冯圣玉;张洁;李美江.有机硅高分子及其应用[M].北京:化学工业出版社,2004:388. |
[7] | 张殿荣;马占兴;杨清芝.现代橡胶配方设计[M].北京:化学工业出版社,1994:55. |
[8] | 幸松民;王一璐.有机硅合成工艺及产品应用[M].北京:化学工业出版社,2000:655. |
[9] | 孙幼红,马美华,薛蒙伟.一种有机硅可剥离涂料的研制[J].材料保护,2006(03):49-51. |
[10] | 沈开猷.不饱和聚酯树脂及其应用[M].北京:化学工业出版社,1988:193. |
- 下载量()
- 访问量()
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%