本文研究了某一位置的层错数目、多层错时的层错间距、炭纤维与玻璃纤维层数的比例等层错结构参数对玻璃纤维(GF)/炭纤维(CF)混杂复合材料弯曲性能的影响.结果表明:对于一定的混杂复合材料,弯曲强度随着某一位置层错数目的减少而增加;多层层错时,层错间距需达到某一临界值;炭纤维与外层玻璃纤维层数存在一个最佳比例.
参考文献
| [1] | Povl Brondsted;Hans Lilholt;Aage Lystrup .Composite Materials for Wind Power Turbine Blades[J].Annual review of materials research,2005(0):505-538. |
| [2] | Griffin DA.Cost & performance tradeoffs for carbon fibers in wind[M].,2004 |
| [3] | 戴春晖,刘钧,曾竟成,边力平.复合材料风电叶片的发展现状及若干问题的对策[J].玻璃钢/复合材料,2008(01):53-56. |
| [4] | 陈宗来,陈余岳.大型风力机复合材料叶片技术及进展[J].玻璃钢/复合材料,2005(03):53-56. |
| [5] | Griffin DA .Blade system design studies volume Ⅰ:composite technologies for large wind turbine blades[R].SAND2002-1879,2002. |
| [6] | 邓宗才,李建辉.混杂FRP复合材料混杂效应的研究与进展[J].玻璃钢/复合材料,2008(01):9-13. |
| [7] | Griffin DA;Ashwill TD.Alternative comopoaite materials for megawatt-scale wind turbine blades:design considerations and recommended testing[A].,2003:1-11. |
| [8] | Griffin DA .Blade system design studies volume Ⅱ:preliminary blade designs and recommended test matrix[R].SAND2004-0073,2004. |
| [9] | Anthony D. Botting;Anthony J. Vizzini;Sung W. Lee .Effect of Ply-Drop Configuration on Delamination Strength of Tapered Composite Structures[J].AIAA journal,1996(8):1650-1656. |
| [10] | Cairns DS;andell JM;Scott ME;Maccagnano JZ.Design considerations for ply drops in composite wind turbine blades[A].Reno,Nevada,CA,1997:1-12. |
| [11] | Scott ME.Effects of ply drops on the fatigue resistance of composite material and structures[M].Bozeman:Montana State University,1997 |
| [12] | Shim DJ;Lagace PA .Mechanisms and structural parameters affecting the interlaminar stress field in laminates with ply drop-offs[J].Journal of Composite Materials,2006(4):345-369. |
| [13] | C. A. STEEVES;N. A. FLECK .Compressive strength of composite laminates with terminated internal plies[J].Composites, Part A. Applied science and manufacturing,2005(6):798-805. |
| [14] | Heung Soo Kim;Seung Yun Rhee;Maenghyo Cho .Simple and efficient interlaminar stress analysis of composite laminates with internal ply-drop[J].Composite structures,2008(1):73-86. |
| [15] | B.R. Vidyashankar;A.V. Krishna Murty .Analysis of laminates with ply drops[J].Composites science and technology,2001(5):749-758. |
| [16] | 邵小军,岳珠峰,刘永寿.对称削层复合材料结构的有限元分析[J].强度与环境,2006(01):9-13,25. |
| [17] | 邵小军,岳珠峰,王毅,张庆茂.复合材料大斜削结构压缩试验和损伤模拟研究[J].航空材料学报,2007(05):95-100. |
| [18] | 邵小军,岳珠峰,王毅,张庆茂.复合材料斜削结构试验和损伤模拟研究[J].材料科学与工程学报,2006(03):346-350. |
| [19] | A. Mukherjee;B. Varughese .Design guidelines for ply drop-off in laminated composite structures[J].Composites, Part B. Engineering,2001(2):153-164. |
| [20] | 陈心爽;陶建新;薛元德.单向复合材料梁三点弯曲时损伤机理分析及其数值模拟[J].玻璃钢/复合材料,1990(05):1-7,21. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%