热固性树脂基复合材料结构在热压罐成型过程中,由于模具的约束作用,导致构件内部产生残余应力,进而引起工件回弹变形和翘曲变形.综述和分析了影响残余应力和变形产生的各种模具因素,包括模具热传导性能、模具线膨胀系数、模具表面处理、模具角半径和模具的结构形式.
参考文献
[1] | 何颖,蔡闻峰,赵鹏飞.热压罐成型中温固化复合材料模具[J].纤维复合材料,2006(01):58-59. |
[2] | Sarrazin H.;Ahn SH.;Springer GS.;Kim B. .EFFECTS OF PROCESSING TEMPERATURE AND LAYUP ON SPRINGBACK[J].Journal of Composite Materials,1995(10):1278-1294. |
[3] | Graham Twigg;Anoush Poursartip;Goran Fernlund .An experimental method for quantifying tool-part shear interaction during composites processing[J].Composites science and technology,2003(13):1985-2002. |
[4] | Twigg G;Poursartip A;Fernlund G.Tool-part interaction in composites processing.Part Ⅰ:experimental investigation and analytical model[J].Composites Part A:Applied Science and Manufacturing,2004(35):121-133. |
[5] | Twigg G;Poursartip A;Fernlund G.Tool-part interaction in composites processing.Part Ⅱ:numerical modeling[J].Composites Part A:Applied Science and Manufacturing,2004(35):135-141. |
[6] | Femlund G;Rahman N;Courdji R.Experimental and numerical study of the effect of cure cycle,tool surface,geometry and byup on the dimensional fidelity of autoclave processed composite parts[J].Composites Part A:Applied Science and Manufacturing,2002(33):341-351. |
[7] | Flanagan R.The dimensional stability of composite laminates and structures[M].Belfast:Queen's University of Belfast,1997 |
[8] | N. ERSOY;K. POTTER;M. R. WISNOM .An experimental method to study the frictional processes during composites manufacturing[J].Composites, Part A. Applied science and manufacturing,2005(11):1536-1544. |
[9] | Svanberg J.M;Holmberg J.A.Prediction of shape distortions Part Ⅰ.FE-implementatien of a path dependent constitutive model[J].Composites Part A:Applied Science and Manufacturing,2004(35):711-721. |
[10] | Svanberg J.M;Holmberg J.A .Prediction of shape distortions Part Ⅱ.Experimental validation and analysis of boundary conditions[J].Composites Part A:Applied Science and Manufacturing,2004,35:723-734. |
[11] | Cho M;Kim M.H;Chung C.H et al.A study on the room-temperature curvature shapes of unsymmetrical laminates including slippage effects[J].Journal of Composite Materials,1988,32(05):460-483. |
[12] | Holmberg J.A.Influence of chemical shrinkage on shape distortion of RTM composites[A].Paris:SAMPE,1998:621-632. |
[13] | Radford DW.;Rennick TS. .Separating sources of manufacturing distortion in laminated composites[J].Journal of Reinforced Plastics and Composites,2000(8):621-641. |
[14] | 梁宪珠.复合材料垂直安定面固化模具的设计和制造[J].航空制造技术,1998(06):32-33. |
[15] | 王永贵,梁宪珠.热压罐工艺的成型压力对框架式模具温度场的影响[J].玻璃钢/复合材料,2009(04):70-73,76. |
[16] | 赵鹏飞,赵景丽,何颖.共固化成型无人机用复合材料/蜂窝夹层结构面板的性能[J].玻璃钢/复合材料,2009(01):62-64. |
[17] | 王永贵,梁宪珠,曹正华,张博明,戴福洪,张铖.热压罐工艺成型先进复合材料构件的温度场研究综述[J].玻璃钢/复合材料,2009(03):81-85. |
[18] | 王永贵,梁宪珠,薛向晨,张博明,姜澎,岳广全,张铖.热压罐工艺的传热分析和框架式模具温度场分布[J].航空制造技术,2008(22):80-83,87. |
[19] | Salagnac P;Dutournie P;Glouannec P .Simulations of heat transfers in an autoclave. Applications to the curing of composite material parts[J].Journal de Physique.IV,2004(0):467-472. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%