针对3种国外产碳纤维/环氧预浸料,测试表征了预浸料的工艺特性,并采用热压罐零吸胶工艺制备了复合材料层板,考察了工艺条件对层板厚度和内部缺陷的影响,分析了成型质量与预浸料特性之间的关联性,进一步研究了层板弯曲性能、层间剪切性能对成型质量变化的敏感性.实验结果表明,由于零吸胶工艺树脂流动受到很大限制,预浸料树脂含量不均容易造成所成型层板厚度不均、表面不平整,另外,预浸料树脂流动性小的体系在层问容易出现明显富树脂现象;零吸胶工艺夹杂空气主要在真空作用下通过铺层内的通道排出,因此预浸料气体渗透率和成型封装方式对孔隙缺陷有重要影响;实验范围内,工艺条件的改变没有显著影响所成型层板的短梁剪切性能和弯曲性能.研究结果对于预浸料选择和国产高性能预浸料的开发具有重要参考价值.
参考文献
| [1] | Wingard CD. .Characterization of prepreg and cured epoxy/fiberglass composite material for use in advanced composite piping systems[J].Thermochimica Acta: An International Journal Concerned with the Broader Aspects of Thermochemistry and Its Applications to Chemical Problems,2000(0):293-301. |
| [2] | Xie, M;Zhang, ZG;Gu, YZ;Li, M;Su, YQ .A new method to characterize the cure state of epoxy prepreg by dynamic mechanical analysis[J].Thermochimica Acta: An International Journal Concerned with the Broader Aspects of Thermochemistry and Its Applications to Chemical Problems,2009(1/2):8-17. |
| [3] | 马晓东,孙志杰,顾轶卓,辛朝波,李敏,张佐光.变厚度复合材料热压罐工艺层板厚度控制的实验研究[J].复合材料学报,2009(05):14-19. |
| [4] | Tomohiro Yokozeki;Yutaka Iwahori;Shin Ishiwata .Mechanical properties of CFRP laminates manufactured from unidirectional prepregs using CSCNT-dispersed epoxy[J].Composites, Part A. Applied science and manufacturing,2007(10):2121-2130. |
| [5] | Toshio Ogasawara;Yuichi Ishida;Rikio Yokota .Processing and properties of carbon fiber/Triple-A polyimide composites fabricated from imide oligomer dry prepreg[J].Composites, Part A. Applied science and manufacturing,2007(5):1296-1303. |
| [6] | Horatiu Teodorescu-Draghicescu;Sorin Vlase.Homogenization and averaging methods to predict elastic properties of pre-impregnated composite materials[J].Computational Materials Science |
| [7] | Yurgartis S W .Measurement of small angle fiber misaligmnents in continuous fiber composites[J].Computer Science and Technology,1987,30(04):279-293. |
| [8] | 杨进军,张佐光,曹正华.纤维分布不均匀的层压板表征与弯曲性能研究[J].玻璃钢/复合材料,2006(04):7-12. |
| [9] | 杨进军,曹正华.基于图像处理技术的复合材料纤维密实状态表征[J].纤维复合材料,2009(04):32-37. |
| [10] | 郑义珠 .蜂窝夹层结构真空袋共固化过程芯材内压与变形研究[D].北京:北京航空航天大学,2008. |
| [11] | 李艳亮,益小苏,唐邦铭,张子龙,安学锋.复合材料层压板的变形：树脂基体、增强纤维与非对称正交铺层变形的关系[J].玻璃钢/复合材料,2010(01):20-23. |
| [12] | 李敏,张宝艳.不对称铺层复合材料变形规律的实验研究[J].玻璃钢/复合材料,2006(05):28-31. |
| [13] | Tamaki Naganuma .Influence of prepreg conditions on the void occurrence and tensile properties of woven glass fiber-reinforced polyimide composites[J].Composites science and technology,2009(14):2428. |
| [14] | 孙凯 .热压罐零吸胶工艺树脂压力与预浸料气体渗透性实验研究[D].北京:北京航空航天大学,2010. |
| [15] | 孙凯;李敏;顾轶卓.热压罐零吸胶工艺树脂压力变化规律及孔隙形成分析[J].复合材料学报 |
| [16] | 杨祖荣.化工原理[M].北京:化学工业出版社,2004:450-451. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%