天然纤维具有强度高、环境友好、密度小、成本低等优点,可替代玻璃纤维或碳纤维作为不饱和聚酯树脂的增强材料.由于天然纤维与不饱和聚酯的界面结合较差,复合材料的机械性能不高,通常采取物理或化学的方法对其进行预处理,以提高纤维与基体之间的界面结合强度.本文总结了天然纤维常用的几种表面改性方法及其对不饱和聚酯树脂的增强效果.
参考文献
[1] | 张小苹,周祝林.不饱和聚酯树脂在复合材料中的应用[J].纤维复合材料,2008(01):28-31. |
[2] | 张文军,朱春宇.不饱和聚酯树脂改性研究进展[J].热固性树脂,2007(04):41-43,46. |
[3] | 张璐,黄故.麻纤维增强热塑性复合材料及其开发应用[J].玻璃钢/复合材料,2010(03):81-83,88. |
[4] | Kathleen Van de Velde;Paul Kiekens .Wettability of natural fibres used as reinforcement for composites[J].Die Angewandte Makromolekulare Chemie,1999,272(4761):87-93. |
[5] | 方明霞,全炜倬.具有天然纤维复合材料车身的汽车振动特性研究[J].玻璃钢/复合材料,2009(05):72-77. |
[6] | Piggott MR;Sanadi A;Chua PS;Andison D.Mechanical interactions in the interfacial region of fiber reinforced thermosetsComposites interfaces[M].Elsevier Science Publishing,1986:109-121. |
[7] | M.R.Piggott.Load bearing fibre composites[M].Oxford:Pergamon Press,1980 |
[8] | Drzal.L.T;Madhuka.M .Fibre-matrix adhesion and its relationship to composite mechanical properties[J].Journal of Materials Science,1993,28(03):569-610. |
[9] | 陈平,陆春,于祺,李俊燕.纤维增强热塑性树脂基复合材料界面研究进展[J].材料科学与工艺,2007(05):665-669. |
[10] | S.N.Maiti;M.R.Hassan .Melt theological properties of polyprepylene wood flour composites[J].Journal of Applied Polymer Science,1989,37(07):2019-2032. |
[11] | P.A. Sreekumar;Selvin P. Thomas;Jean marc Saiter .Effect of fiber surface modification on the mechanical and water absorption characteristics of sisal/polyester composites fabricated by resin transfer molding[J].Composites. Part A, Applied science and manufacturing,2009(11):1777-1784. |
[12] | S. MARAIS;F. GOUANVE;A. BONNESOEUR .Unsaturated polyester composites reinforced with flax fibers: effect of cold plasma and autoclave treatments on mechanical and permeation properties[J].Composites, Part A. Applied science and manufacturing,2005(7):975-986. |
[13] | A. Stamboulis;C.A. Baillie;T. Peijs .Effects of environmental conditions on mechanical and physical properties of flax fibers[J].Composites, Part A. Applied science and manufacturing,2001(8):1105-1115. |
[14] | Xue Li;Lope G. Tabil;Satyanarayan Panigrahi .Chemical Treatments of Natural Fiber for Use in Natural Fiber-Reinforced Composites: A Review[J].Journal of polymers and the environment,2007(1):25-33. |
[15] | 王俊勃,赵川,高晓丁,郑水蓉,孙曼灵.苎麻纤维增强酚醛复合材料的研究[J].纤维复合材料,2001(01):13-15. |
[16] | Sharifah H. Aziz;Martin P. Ansell .The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: Part 1 -- polyester resin matrix[J].Composites science and technology,2004(9):1219-1230. |
[17] | Jayamol George;M. S. Sreeekala;Sabu Thomas .A Review on Interface Modification and Characterization of Natural Fiber Reinforced Plastic Composites[J].Polymer engineering and science,2001(9):1471-1485. |
[18] | 崔益华,周叶青.木纤维增强热塑性复合材料的界面研究现状[J].纤维复合材料,2006(01):53-57,36. |
[19] | J. Rout;M. Misra;S.S. Tripathy .The influence of fibre treatment on the performance of coir-polyester composites[J].Composites science and technology,2001(9):1303-1310. |
[20] | KRISHNAN M;NARAYANR.compatibilization of biomass fibers with hydrophobic materials[J].Materials Research Society,1992 |
[21] | A. Bessadok;S. Roudesli;S. Marais .Alfa fibres for unsaturated polyester composites reinforcement: Effects of chemical treatments on mechanical and permeation properties[J].Composites, Part A. Applied science and manufacturing,2009(2):184-195. |
[22] | Alix, S.;Philippe, E.;Bessadok, A.;Lebrun, L.;Morvan, C.;Marais, S. .Effect of chemical treatments on water sorption and mechanical properties of flax fibres[J].Bioresource Technology: Biomass, Bioenergy, Biowastes, Conversion Technologies, Biotransformations, Production Technologies,2009(20):4742-4749. |
[23] | N.E.Marcovich;M.I.Aranguren;M.M.Reboredo .Modified woodflour as thermoset fillers Part I.Effect of the chemical modification and percentage of filler on the mechanical properties[J].Polymer: The International Journal for the Science and Technology of Polymers,2001(2):815-825. |
[24] | Supranee Sangthong;Thirawudh Pongprayoon;Nantaya Yanumet .Mechanical property improvement of unsaturated polyester composite reinforced with admicellar-treated sisal fibers[J].Composites. Part A, Applied science and manufacturing,2009(6/7):687-694. |
[25] | Chung-Li Lai;Harwell J.H;O'Rear E.A;Komatsuzuakl S.Arai J,Nakakawaji T,Ito Y .Formation of poly(tetrafluoroethylene)thin films on alumina by admicellar polymerization[J].Langmuir,1995,11(03):905-911. |
[26] | Yuan WL.;O'Rear EA.;Grady BP.;Glatzhofer DT. .Nanometer-thick poly(pyrrole) films formed by admicellar polymerization under conditions of depleting adsolubilization[J].Langmuir: The ACS Journal of Surfaces and Colloids,2002(8):3343-3351. |
[27] | Pongprayoon, T;Yanumet, N;Sangthong, S .Surface behavior and film formation analysis of sisal fiber coated by poly(methyl methacrylate) ultrathin film[J].Colloids and Surfaces. A, Physicochemical and Engineering Aspects,2008(1/3):130-137. |
[28] | M. D. H. BEG;K. L. PICKERING .Fiber Pretreatment and Its Effects on Wood Fiber Reinforced Polypropylene Composites[J].Materials and Manufacturing Processes,2006(3/4):303-307. |
[29] | Yanjun Xie;Callum A.S. Hill;Zefang Xiao .Silane coupling agents used for natural fiber/polymer composites: A review[J].Composites, Part A. Applied science and manufacturing,2010(7):806-819. |
[30] | Soo-Jin Park;Joong-Seong Jin .Effect of Silane Coupling Agent on Interphase and Performance of Glass Fibers/Unsanturate Polyester Composites[J].Journal of Colloid and Interface Science,2001(1):174-179. |
[31] | 雷文,杨涛.不饱和聚酯树脂/大麻纤维复合材料的热氧老化[J].玻璃钢/复合材料,2009(05):36-41. |
[32] | L. A. POTHAN;S. THOMAS;G. GROENINCKX (Belgium) .The role of fibre/matrix interactions on the dynamic mechanical properties of chemically modified banana fibre/ polyester composites[J].Composites, Part A. Applied science and manufacturing,2006(9):1260-1269. |
[33] | Ioanna C. Finegan;Ronald F. Gibson .Recent research on enhancement of damping in polymer composites[J].Composite Structures,1999(2/3):89-98. |
[34] | Shukla S.R .[J].Application of Polymer Science,1993,49:1423. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%