纤维曲线铺放技术可以同时对刚度和强度进行剪裁优化设计,由此制得的变刚度复合材料层合板与传统的复合材料层合板相比,其重量和成本可以减少10％ ～30％,同时结构性能得到显著提高.本文先介绍了纤维曲线铺放技术及变刚度复合材料的概念,对比分析了纤维曲线铺放的两种方法,然后讨论了变刚度复合材料层合板设计制造的主要问题,重点论述了纤维曲线铺放变刚度层合板的应用研究,最后对纤维曲线铺放技术的应用前景进行了展望.
参考文献
| [1] | 李勇,肖军.复合材料纤维铺放技术及其应用[J].纤维复合材料,2002(03):39-41. |
| [2] | 蔡金钢.纤维铺放技术[J].纤维复合材料,1991(03) |
| [3] | Agnes Blom,盛蔼伦.纤维铺放、可变刚度复合材料：航宇结构的未来[J].航空制造技术,2010(17):64-65. |
| [4] | Paul M Weaver;Kevin D.Potter.Buckling of Variable Angle Tow Plates:from Concept to Experiment[A].Palm Springs,California,2009 |
| [5] | Z. Gurdal;B.F. Tatting;C.K. Wu .Variable stiffness composite panels: Effects of stiffness variation on the in-plane and buckling response[J].Composites. Part A, Applied science and manufacturing,2008(5):911-922. |
| [6] | Shahriar Setoodeh;Mostafa M;Abdalla;Samuel T;IJsselmuiden;Zafer Guerdal .Design Of Variable-stiffness Composite Panels For Maximum Buckling Load[J].Composite structures,2009(1):109-117. |
| [7] | P.J.Crothers;K.Drechsler;D.Feltin;I.Herszberg,T.Kruckenberg.Tailored fiber placement to minimise stress concentrations[J].Composites Part A:Applied Science and Manufacturing,1997(28A):619-625. |
| [8] | Jegley,D;Tatting,B;Gürdal,Z.Optimization of Elastically Tailored Tow-Placed Plates with Holes[A].,2003 |
| [9] | Konrad Gliesche;Tamara Hubner;Holger Orawetz .Application of the tailored fibre placement (TFP) process for a local reinforcement on an "open-hole" tension plate from carbon/epoxy laminates[J].Composites science and technology,2003(1):81-88. |
| [10] | C.S. Lopes;Z. Gurdal;P.P. Camanho .Tailoring for strength of composite steered-fibre panels with cutouts[J].Composites, Part A. Applied science and manufacturing,2010(12):1760-1767. |
| [11] | Hyer MW;Charette RF .Use of curvilinear fiber format in composite structure design[J].AIAA Journal,1991,29(06):1011-1015. |
| [12] | Hyer,M.W;Lee,H.H .The Use of Curvilinear Fiber Format to Improve Buckling Resistance of Composite Plates with Central Holes[J].Computers & Structures,1991,18(03):239-261. |
| [13] | Gürdal,Z;Olmedo,R .In-Plane Response of Laminates with Spatially Varying Fiber Orientations:Variable Stiffness Concept[J].AIAA Journal,1993,31(04):751-758. |
| [14] | Tatting,B.F;Gürdal,Z.Design and Manufacture of Tow-Placed Variable Stiffness Composite Laminates with Manufacturing Considerations[A].Gainesville,FL,1998 |
| [15] | Waldhart,C .Analysis of Tow-Placed,Variable Stiffness Laminates[D].Virginia Polytechnic Institute and State University,Virginia,1996. |
| [16] | Gürdal,Z;Tatting B.F;Wu,K.C.Tow-Placement Technology and Fabrication Issues for Laminated Composite Structures[A].American Institute of Aeronautics and Astronautics,2005:2005-2017. |
| [17] | Lopes CS;Camanho PP;Gurdal Z;Tatting BF .Progressive failure analysis of tow-placed, variable-stiffness composite panels[J].International Journal of Solids and Structures,2007(25/26):8493-8516. |
| [18] | P. Mattheij;K. Gliesche;D. Feltin .3D reinforced stitched carbon/epoxy laminates made by tailored fibre placement[J].Composites, Part A. Applied science and manufacturing,2000(6):571-581. |
| [19] | Biggers SB;Srinivasan S .Compression buckling response of tailored rectangular composite plates[J].AIAA Journal,1993,31(03):590-596. |
| [20] | A.T. Baranski;S.B. Biggers Jr .Postbuckling analysis of tailored composite plates with progressive damage[J].Composite Structures,1999(3):245-255. |
| [21] | 马永前,张淑杰,许震宇.纤维曲线铺放的变刚度复合材料层合板的屈曲[J].玻璃钢/复合材料,2009(05):31-35. |
| [22] | Yau SS;Chou TW.Strength of woven-fabric composites with drilled and molded holes[J].composite materials testing and design,1988(972):423-437. |
| [23] | R.Li;D.Kelly;A.Crosky.Strength improvement by fibre steering around a pin loaded hole[J].Computers & Structures,2002(57):377-383. |
| [24] | 邵冠军,游有鹏,缪群华.复合材料开孔层合板的纤维铺放路径优化设计[J].玻璃钢/复合材料,2006(04):31-34. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%