简要介绍了复合材料三维增强的方法及优缺点,重点综述复合材料z-pin增强技术的国内外研究现状及其应用技术.同时,对今后z-pin增强技术的发展提供了一些建议.
参考文献
| [1] | 刘兆麟,程灿灿.三维编织复合材料的细观结构与力学性能[J].纤维复合材料,2010(03):10-14. |
| [2] | Ivana K;Partridge,Cartie.Delamination resistant laminates by z-Fiber pinning:Part Ⅰ manufacture and fracture performance[J].Composites Part A:Applied Science and Manufacturing,2005(36):55-64. |
| [3] | Wenyi Yan;Hong-Yuan Liu;Yiu-Wing Mai .Mode Ⅱ delamination toughness of z-pinned laminates[J].Composites science and technology,2004(13/14):1937-1945. |
| [4] | A.P. Mouritz .Review of z-pinned composite laminates[J].Composites, Part A. Applied science and manufacturing,2007(12):2383-2397. |
| [5] | A.P. Mouritz .Compression properties of z-pinned composite laminates[J].Composites science and technology,2007(15/16):3110-3120. |
| [6] | P. Chang;A.P. Mouritz;B.N. Cox .Flexural properties of z-pinned laminates[J].Composites, Part A. Applied science and manufacturing,2007(1):244-251. |
| [7] | P. CHANG;A. P. MOURITZ;B. N. COX .Properties and failure mechanisms of z-pinned laminates in monotonic and cyclic tension[J].Composites, Part A. Applied science and manufacturing,2006(10):1501-1513. |
| [8] | Steeves CA;Fleck NA .In-plane properties of composite laminates with through-thickness pin reinforcement[J].International Journal of Solids and Structures,2006(10):3197-3212. |
| [9] | O'Brien;Krueger.Influence of compression and shear on the strength of composite laminate with z-pinned reinforcement[J].Applied Composite Materials,2006(13):173-189. |
| [10] | Grassi M;Zhang X;Meo M.Prediction of sti? ness and stresses in z-fiber reinforced composite laminates[J].Composites Part A:Applied Science and Manufacturing,2002(33):1653-64. |
| [11] | Meo M;Achard F;Grassi M.Finite element modelling of bridging micro-mechanics in through-thickness reinforced composite laminates[J].Computers & Structures,2005(71):383-387. |
| [12] | 郑锡涛,李泽江,杨帆.Z-pin增强复合材料层合板断裂韧性试验研究[J].复合材料学报,2010(04):180-188. |
| [13] | 孙先念,刘书田.Z-pins几何分布对其增强复合材料双悬臂梁Ⅰ型层间韧性的影响[J].复合材料学报,2007(03):160-166. |
| [14] | 刘(韦华),矫桂琼,管国阳,常岩军.Z-pin增强陶瓷基复合材料拉伸和层间剪切性能[J].复合材料学报,2007(01):86-90. |
| [15] | 王言磊,郝庆多,欧进萍.复合材料层合板面内剪切实验方法的评价[J].玻璃钢/复合材料,2007(03):6-8,24. |
| [16] | 滕锦,李斌太,庄茁.z-pin增韧复合材料层合板低速冲击损伤过程研究[J].工程力学,2006(z1):209-216. |
| [17] | 王晓旭,陈利.复合材料z-pinning技术的应用与发展[J].宇航材料工艺,2009(06):10-14. |
| [18] | 孙涛,谭永刚,肖军,李勇,范琳,王鹏,马丹.高压油管接头Z-pin技术增强机理研究[J].武汉理工大学学报,2009(21):66-68,88. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%