为研究液体模塑成型加工过程中,树脂流体在厚型织物预型件厚度方向的3D流动渗透情况,采用基于超声波传感监测技术的3D渗透率测试装置,对厚型结构织物增强体内部流动渗透情况进行实验研究.通过比较玻璃纤维织物的组织结构、织物织造密度和纱线细度变化情况下,织物预型件厚度方向的流动前峰及渗透性,得出了织物结构参数对渗透性能的影响.
参考文献
| [1] | Rudd CD;Long AC;Kendall KN;Mangin CGE.Liquid Moulding Technologies:Resin Transfer Moulding,Structural Reaction Injection Moulding and Related Processing Techniques[M].Abington Cambridge CB:Woodhead Publishing Ltd,1997 |
| [2] | Rieber G;Mitschang P .2D Permeability Changes due to Stitching Seams[J].Composites Part A:Applied Science and Manufacturing,2010,41:4-7. |
| [3] | 孙静,段跃新,肇研,王伟.真空渗透成型工艺制件厚度变化规律[J].复合材料学报,2010(03):86-91. |
| [4] | A. Endruweit;P. McGregor;A.C. Long .Influence of the fabric architecture on the variations in experimentally determined in-plane permeability values[J].Composites science and technology,2006(11/12):1778-1792. |
| [5] | 薛道顺,周红涛,胡红.非织造工艺对天然纤维增强体树脂流动性能的影响[J].玻璃钢1复合材料,2011(01):29-32. |
| [6] | 薛道顺,胡红.真空辅助成型工艺中亚麻纤维增强体树脂流动性能的研究[J].玻璃钢/复合材料,2011(02):15-18,7. |
| [7] | 周莉莉,李炜,罗永康.LCM增强材料渗透性能研究[J].玻璃钢/复合材料,2009(06):28-30,61. |
| [8] | 梁晓宁,李炜,罗永康,张锦南.厚铺层结构纤维增强体渗透性能研究[J].玻璃钢/复合材料,2010(01):46-48,52. |
| [9] | 邓育文,王继辉,高国强,张垣.LCM工艺增强材料横向渗透率测量研究[J].武汉理工大学学报,2006(01):15-17,21. |
| [10] | P. Ouagne;J. Breard .Continuous transverse permeability of fibrous media[J].Composites, Part A. Applied science and manufacturing,2010(1):22-28. |
| [11] | 简抗抗,张佐光,顾轶卓,孙志杰.不同纤维堆积状态下饱和渗透率实验研究[J].复合材料学报,2006(01):31-36. |
| [12] | Yenilmez B;Senan M;Sozer EM .Variation of Part Thickness and Compaction Pressure in Vacuum Infusion Process[J].Composites Science and Technology,2009,69:1710-1719. |
| [13] | 曹瑞谦,胡红,罗永康.针织结构对复合材料渗透率的影响研究[J].玻璃钢/复合材料,2010(03):48-51. |
| [14] | Chan AW;Hwang S-T .Anisotropic In-Plane Permeability of Fabric Media[J].Polymer Engineering and Science,1991,31(16):1233-1239. |
| [15] | Nedanov PB;Advani SG .A Method to Determine 3D Permeability of Fabrious Reinforcements[J].Journal of Composite Materials,2002,36:241-253. |
| [16] | T. Stoven;F. Weyrauch;P. Mitschang .Continuous monitoring of three-dimensional resin flow through a fibre preform[J].Composites, Part A. Applied science and manufacturing,2003(6):475-480. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%