采用不同配比的保护气体,在水冷铜模中堆焊焊缝金属,获得不同扩散氢含量的熔敷焊缝试棒.测定了试棒逸出的扩散氢-时间曲线,并对焊后不同时刻焊缝试棒进行了缺口静弯试验和组织、断口观察分析,研究了不同保护气体条件下焊缝金属中的氢扩散特性及焊缝金属的氢脆敏感性.结果表明,适当增加保护气体的氧化性可改变焊缝组织、夹杂物分布状态和焊缝合金元素含量,大幅度降低焊缝金属的氢脆敏感性.
参考文献
[1] | Wang SH.;Luu WC.;Ho KF.;Wu JK. .Hydrogen permeation in a submerged arc weldment of TMCP steel[J].Materials Chemistry and Physics,2003(2):447-454. |
[2] | 吕向阳.高强钢氢陷形为的定量研究[A].西安:中国机械工程学会焊接学会,1990:26-29. |
[3] | C.Wildash;R.C.Cochrane;R.Gee .Simulation of hydrogen induced cold cracking using electrolytic precharging procedure[J].Science and Technology of Welding and Joining,2001(2):73-78. |
[4] | 可兹洛夫·P·A.焊接船体钢时的氢[M].北京:科学出版社,1973:70-80. |
[5] | Mirza R M;Gee R .Effects of shielding gases on weld diffusible hydrogen contents using cored wires[J].Science and Technology of Welding and Joining,1999,4(02):104-111. |
[6] | Liu S;Olson D L.The role of inclusions in controlling HLSA steel weld microstructures[J].Welding Journal,1986(06):139-148. |
[7] | 邹增大;李亚江.低合金调质高强度钢焊接及工程应用[M].北京:化学工业出版社,2000:82. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%