欢迎登录材料期刊网

材料期刊网

高级检索

交联结构是影响橡胶类材料性能的一个重要因素,考察交联结构的重点是检测和表征交联键类型和交联密度.本文对交联结构的理论和相关的检测技术进行了较为系统的介绍、对比和总结.

参考文献

[1] Blackman E J .Elation ships between the structure of natural rubber vulcanizates and their thermal and oxidativeaging[J].Rubber Chemistry and Technology,1970,43(03):651-663.
[2] 张士齐;周翠薇.应用力化学观点研究天然橡胶硫化机理[J].橡胶工业,1989(10):611.
[3] Qurik R P.Sulfur vulcanization of rubbers[J].Progress of Rubber Plastic Technolcgy,1988(10):31-39.
[4] 范汝良 .天然橡胶在硫化和老化条件下交联结构与动态力学性能研究[D].上海交通大学,2001.
[5] 刘卫东.天然橡胶不同硫化体系磨耗微观结构的研究[J].橡胶工业,1994(41):452-457.
[6] 贾红兵,吉庆敏,金志刚,文威,张士齐,王美珣.不同结构SBR硫化胶的磨耗研究[J].橡胶工业,2000(07):387-391.
[7] Patterson D J;Koenig J L.Vulcanization Studies of Elastomers Using Solid-State Carbon-13 NMR[J].Rubber Chemistry and Technology,1983(56):970.
[8] 刘植榕.橡胶工业手册第八分册试验方法[M].北京:化学工业出版社,1992
[9] 周翠薇.硫化胶制样技术对红外光谱分析的影响[J].橡胶工业,1994(41):97-103.
[10] Moore C G.The nature of crosslinks in tetramethylthiuram disulfide-zincoxide-natural rubber vulcanizatea[J].Journal of Polymer Science,1958(125):503-571.
[11] Gunnen J I .Occurrence and prevention of changes in the chemical structure of nature rubber tire tread vulcanizates during service[J].Rubber Chemistry and Technology,1970,43:1215-1224.
[12] Campbell D S.Structural characterization of vulcanizates,Part X[J].Rubber Chemistry and Technology,1970(43):210-221.
[13] 张士奇.NMR在橡胶中的应用[J].合成橡胶工业,1995(06):370-373.
[14] 吴振耀.橡胶的几种现代分析方法[J].橡胶工业,1994(04):217-230.
[15] Sombatsompop N. .Analysis of cure characteristics on cross-link density and type, and viscoelastic properties of natural rubber[J].Polymer-Plastics Technology and Engineering,1998(3):333-349.
[16] Zaper A M.Solid cahon-13 NMR studies of sulfur vulcanization of nature rubber[J].Rubber Chemistry and Technology,1987(60):252-277.
[17] Smith S R.Solid cabon-13 NMR studies of TMTD-vulcanizated Cis-1,4-polybutadiene at 75.5MHz[J].Rubber Chemistry and Technology,1992(65):177-200.
[18] Krejsa M R.Solid-state cabon-13 NMR studies of accelerated sulfur-vulcanizated Butyl[J].Rubber Chemistry and Technology,1991(64):41-56.
[19] 王作龄 .橡胶交联密度与测试方法[J].世界橡胶工业,1998,25(04):41-46.
[20] 杨清芝.现代橡胶工艺学[M].北京:中国石化出版社,1997
[21] Studebaker M L.Lithium alumium hydride analysis of sulfur-cured vulcanizales[J].Rubber Chemistry and Technology,1970(43):624-643.
[22] Ninan K N.Function distribution and crosslink density of Hydroxyl-termminated polybutadiene[J].Polymer International,1993(03):255.
[23] J F 拉贝克.高分子科学实验方法[M].北京:科学出版社,1991
[24] 芦明,黄志萍,宋永莱.现代仪器分析在聚氨醑中的应用(连载三)聚氨酯弹性体交联密度的表征[J].聚氨酯工业,1998(03):45-50.
[25] 张承焱.模压温度对天然橡胶与金属的胶接强度的影响[J].世界橡胶工业,2001(03):28-31,17.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%