以天然鳞片石墨为原料采用无粘结剂冷压成型方式制备得到了天然鳞片石墨块状样品,研究了经预压块状样品在等静压后的结构特征以及鳞片石墨取向对力学性能的影响.结果表明,预压块状样品等静压后,在不同方向收缩率发生了变化,在Z轴约为10%～11%,在X、Y轴约为7%～8%.等静压后与等静压前相比,样品变得更加密实,抗折强度提高.天然鳞片石墨在块状样品中的取向是随着径向位置而变化的,块状样品的抗折强度与成型时鳞片石墨的取向有关.文章中还对天然鳞片石墨块状样品的微观结构和抗折强度之间的关系.进行了定性分析.
参考文献
| [1] | A. Mirhabibi;B. Rand;S. Baghshahi .Graphite flake carbon composites with a 'sinterable' microbead matrix I. Mechanical properties[J].Carbon: An International Journal Sponsored by the American Carbon Society,2003(8):1593-1603. |
| [2] | A.R. Mirhabibi;B. Rand .Graphite flake-carbon composites. II: Fracture behaviour, toughness, notch insensitivity and Weibull modulus[J].Carbon: An International Journal Sponsored by the American Carbon Society,2007(5):991-997. |
| [3] | Mantell C F.Carbon and graphite handbook[M].New York:wiley,1968 |
| [4] | Oku T;Kurumada A;Imamura Y .Effects of prestresses on mechanical properties of isotropic graphite materials[J].Journal of Nuclear Materials,1998,258-263:814-820. |
| [5] | 印友法.石墨电极中针状焦晶粒取向的研究[J].炭素技术,1990(06):11-15. |
| [6] | Thrower P A;Nagle D C;Horton W S .Comparison of the graphitizabilities of heat-treated coal tar and is mesophase pitches[J].Journal of Appl Crystal Iogr,1973,6:347. |
| [7] | Horton,W.S .An examination of five preferred orientation functions[J].Carbon,1979,17:153-155. |
| [8] | Schryer D R .Determination of the orientation symmetry axis of graphite specimens[J].Carbon,1980,18:225-229. |
| [9] | 于淑贤,刘明非.石墨电极在SEM下的特征[J].炭素技术,2001(04):19-22. |
| [10] | 许斌;王金铎.炭材料生产技术600问[M].北京:冶金工业出版社,2006:218. |
| [11] | 印友法;宋建平.石墨电极的性质与结构[J].炭素技术,1992(04):1-5. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%