RTM成型工艺对复合材料制品性能的影响

材料开发与应用, 2008, 23(2): 27-39. doi: 10.3969/j.issn.1003-1545.2008.02.008

RTM成型工艺对复合材料制品性能的影响

闫刚 ^1, , 樊晓斌 ^2, , 张笑梅 ^3, , 赵丹 ^4, , 赵大为 ^5,

1.洛阳船舶材料研究所,河南,洛阳,471039

2.洛阳船舶材料研究所,河南,洛阳,471039

3.洛阳船舶材料研究所,河南,洛阳,471039

4.山东科技大学机械电子工程学院,山东,青岛,266510

5.武汉船舶设计研究所,湖北,武汉,430084

关键词：树脂传递模塑 , 工艺参数 , 复合材料 , 真空铺助成型

Effects of RTM Process Parameters on the Performance of Composites

RTM(树脂传递模塑的简称)成型工艺是一种将树脂注入闭合模具中浸润增强材料的复合材料成型工艺.工艺参数对复合材料制品性能有很大的影响.本文对注射压力、注射温度、真空辅助、注胶口和排气口的位置、纤维含量和结构等工艺参数对复合材料制品性能的影响进行了概述.

参考文献

[1]	张玉龙;李长德;王喜梅.高技术复合材料制备手册[M].北京:国防工业出版社,2003:348-372.
[2]	马青松,陈朝辉,郑文伟,胡海峰,肖加余.树脂传递模塑-复合材料成型新工艺[J].材料科学与工程,2000(04):92-97.
[3]	Spoerre J;Zhang C;Wang B et al.Integrated product and process design for resin transfer moulded parts[J].Journal of Composite Materials,1998,32(13):1244-1271.
[4]	Cevdet K Y .Onur effects of injection pressure in resin transfer moulding (RTM) of woven carbon fibre/Epoxy composites[J].Polymers and Polymer Composites,2006,14(01):55-64.
[5]	Lee C L;Wei K H .Resin transfer moulding (RTM) process of a high performance epoxy resin.Ⅱ:effects of process variables on the physical,static and dynamic mechanical behaviour[J].Polymer Engineering and Science,2000,40(04):935-943.
[6]	Young WB. .THE EFFECT OF SURFACE TENSION ON TOW IMPREGNATION OF UNIDIRECTIONAL FIBROUS PREFORM IN RESIN TRANSFER MOLDING[J].Journal of Composite Materials,1996(11):1191-1209.
[7]	Chan A W;Larive D E;Morgan R J .Anisotropic permeability of fibre preforms:constant flow rate measurement[J].Journal of Composite Materials,1993,27(10):996-1008.
[8]	邱桂杰.树脂传递模塑工艺中工艺参数对树脂-纤维界面的影响[J].玻璃钢/复合材料,2002(02):24-27.
[9]	Patel N;Rohatgi V;Lee L James .Influence of processing and material variables on resin-fiber interface in liquid composite molding[J].Polymer Composites,1993,14(02):161-172.
[10]	Thirion J M;Girardy H;Waldvogel U .New developments in resin transfer moulding of high-performance composite parts[J].Materials Information Translations Service Series C:Engineered Materials,1988,28(03):81-84.
[11]	N.R.L. Pearce;J.Summerscales .Improving the resin transfer moulding process for fabric-reinforced composites by modification of the fabric architecture[J].Composites, Part A. Applied science and manufacturing,2000(12):1433-1441.
[12]	李海晨,王彪,林新.关于RTM工艺过程树脂渗流的几个重要问题[J].哈尔滨工业大学学报,2001(06):769-772.
[13]	Gauvin R.;Trochu F. .Key issues in numerical simulation for liquid composite molding processes[J].Polymer Composites,1998(3):233-240.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

RTM成型工艺对复合材料制品性能的影响

Effects of RTM Process Parameters on the Performance of Composites

参考文献