研究了不同载荷、不同滑动速度下ZA27- 0.2Si合金的干摩擦磨损性能,并用扫描电子显微镜对其磨损表面形貌和亚表面形貌进行观察.结果表明:在高速度时,随着的载荷的增大,其磨损量增加比较明显;而在低速度时,随着载荷的增大,其磨损量增加比较小,表现了良好的耐磨性能.而且在不同的载荷和速度下,其磨损机理不同.
参考文献
| [1] | 侯平均,武红利,倪锋,孔佑顺,邱然锋.高铝锌合金凝固过程中先共晶富铝相的二次形核与晶粒合并现象[J].材料开发与应用,2002(02):4-8. |
| [2] | 郝远;陈体军;李元东 等.铸造Grp/ZA27复合材料摩擦磨损行为的研究[J].机械工程材料,1998,22(02):22-25. |
| [3] | J. P. Pandey;B. K. Prasad;A. H. Yegneswaran .Dry sliding wear behaviour of a zinc-based alloy: a comparative study with a leaded-tin bronze[J].Materials transactions,1998(11):1121-1125. |
| [4] | 陈体军,YUAN Cheng-ren,郝远,LI Jian.原位自生Sip/ZA27复合材料的磨损性能[J].中国有色金属学报,2008(07):1231-1236. |
| [5] | 刘俊友;王士本 .硅相锌基复合材料减摩抗磨性能的研究[J].摩擦学学报,1996,16(02):137-142. |
| [6] | B. K. Prasad .Effect of microstructure on the sliding wear performance of a Zn-Al-Ni alloy[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2000(1/2):100-112. |
| [7] | Prasad B K;Patwardhan A K;Yegneswaran A H .Dry sliding wear characteristics of some zinc-aluminium alloys:a comparative with a conventional bearing bronze at a slow speed[J].Wear,1996,199(01):142-151. |
| [8] | Murphy S;Savaskan T .Comparative wear behaviovr of Zn-Al based alloys in an automotive engine application[J].Wear,1984,98(11):151-161. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%