以往的复合材料固化过程模拟,大多只是在简单外部条件下,或者针对厚尺寸复合材料构件进行的厚度方向的温度场模拟,而与实际复合材料的固化过程有一定的偏差.本文在考虑辅助材料、模具以及罐内强迫对流换热现象的情况下,建立了复合材料热压罐工艺固化温度场的精化模拟方法.在此基础上,针对常用航空复合材料结构以及材料体系,进行了相应的固化温度场模拟,并对结果进行了分析.
参考文献
[1] | Kosar V;Gomzi Z .In-depth analysis of the mathematical model of polyester thermosets curing[J].European Polymer Journal,2004(12):2793-2802. |
[2] | Schawe JEK. .A description of chemical and diffusion control in isothermal kinetics of cure kinetics[J].Thermochimica Acta: An International Journal Concerned with the Broader Aspects of Thermochemistry and Its Applications to Chemical Problems,2002(1/2):299-312. |
[3] | Zetterlund P B;Johnson A F .A new method for the determination of the Arrhenins constants for the cure process of unsaturated polyester resins based on a mechanistic model[J].Thermochimica Acta,1996,289(02):209-221. |
[4] | Vincenza Antonucci;Michele Giordano;Sabato Inserra Imparato .Analysis of Heat Transfer in Autoclave Technology[J].Polymer Composites,2001(5):613-620. |
[5] | Ansys CFX 10.0 Manual[Z]. |
[6] | Hagnauer G L .Quality assurance of epoxy resin prepregs using liquid chromatography[J].Polymer Composites,1980,1:81-87. |
[7] | Peter J H;Michael E M .Chemorhnology of thermosetsan overview[J].Polymer Engineering and Science,1996,36(05):593-609. |
[8] | 吴春涛 .HD03环氧复合材料模压工艺数字化设计[D].哈尔滨工业大学,2005. |
[9] | Loos A C;Springer G S .Curing of epoxy matrix composites[J].Journal of Composite Materials,1983,17:135-169. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%