以聚丙烯树脂(PP)为基体,剑麻纤维(SF)、玻璃纤维(GF)为增强材料.采用熔融共混、模压成型工艺制备PP/ SF/GF复合材料.室温条件下,将试样在水中浸泡不同时间,分析其吸水率及性能的变化.结果表明,复合材料的吸水率均随浸泡时间的延长和SF/GF含量的增加而逐渐增加,其冲击强度和弯曲强度均随浸泡时间和SF/GF含量的增加呈下降趋势.同时,复合材料的热稳定性、PP相的结晶速率及结晶度也有所降低.
参考文献
[1] | Kaushal S;Tankala K;Rao L F.Some hygrothermal effects on the mechanical behavior and fractography of glass-epoxy composites with modified interface[J].Journal of Materials Science,1991(26):6293-6299. |
[2] | Friedrich K.Fractographic analysis of polymer composites[A].,1989:426-487. |
[3] | 崔益华,Noruziaan Bahman,Lee Stephen,Chang Moe,陶杰.玻璃纤维/木塑混杂复合材料及其协同增强效应[J].高分子材料科学与工程,2006(03):231-234. |
[4] | 张波,陆绍荣,王敏,刘婷.剑麻纤维/聚丙烯复合材料物理力学性能的研究[J].中国人造板,2009(01):13-17. |
[5] | Najafi SK;Sharifnia H;Tajvidi M .Effects of water absorption on creep behavior of wood-plastic composites[J].Journal of Composite Materials,2008(10):993-1002. |
[6] | Najafi SK;Kiaefar A;Hamidina E;Tajvidi M .Water absorption behavior of composites from sawdust and recycled plastics[J].Journal of Reinforced Plastics and Composites,2007(3):341-348. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%