介绍了刀具破损机理研究的主要领域,包括断续切削过程中的切入切出破损研究、热应力和热裂纹与破损之间关系、刀具几何参数影响以及破损监控预报研究等,回顾了刀具破损机理研究的历史和现状,对切入切出破损、动态切削力及热应力和热裂纹与破损之间关系的研究概况进行了详细论述,最后论述了刀具破损研究的发展趋势.
参考文献
| [1] | Kronenberg M.Analysis of Initial Contact of Milling Cutter and Work in Relation to Tool Life[J].Transactions of The Asme,1946(68) |
| [2] | Optiz H;Beckhaus H.Influence of Initial Contact on Tool Life when Face Milling High Strength Materials[J].Annals of CIRP,1970 |
| [3] | 董丽华,袁哲俊,李振加,严复钢.铣刀片的应力场分析[J].工具技术,1999(03):8-10. |
| [4] | 董丽华;李振加 等.波形刃铣刀片切削机理研究[J].哈尔滨理工大学学报,1999,4(02):13-15. |
| [5] | 孙伟军,李振加,王志刚,宁世友.面铣刀切入方式的判别式推导[J].哈尔滨理工大学学报,2005(01):1-3. |
| [6] | 胡映宁,王成勇,张华伟,刘会宁.小直径铣刀铣削淬硬钢切入过程的动力学仿真研究[J].机械强度,2005(06):782-789. |
| [7] | Hoshi T;Okushima K .Optimum Diameter and Positions of a Fly Cutter for Milling Steel at Light Cuts[J].Transactions of the ASME,1965,87:442. |
| [8] | Loladze T N .Nature of Brittle Failure in Interrupted Cutting[J].Annals of CIRP,1975,24(01):13. |
| [9] | Pekelharing A J .The Exit Failure in Interrupted Cutting[J].Annals of CIRP,1978,27-1:5. |
| [10] | Shaw M C .Fracture of Metal Cutting Tools[J].Annals of CIRP,1979,28-1:19-21. |
| [11] | Kramaruddin A G B .Tool Life in Interrupted Cuttting[D].University of Manchester,1984. |
| [12] | Lee Y M;Sampath W S;Shaw M C.Tool Fracture Probability of Cutting Tools Under Different Exiting Conditions[M].ASME,1984:168-170. |
| [13] | Tsuyoshi Asai;Soiji Nakatani .Study on the Early Fracture of Carbide Tools[J].Annals of The Cirp,1980,29 |
| [14] | Nakamura Shimesu .Influence of Disengage Angle upon Initial Fracture of Tool Edge[J].Bulletin of The Japan Society of Precision Engineering,1985,19(03) |
| [15] | 李振加;顾祖慰 等.铣削过程刀具破损原因的探讨[J].机械工程学报,1993,29(04) |
| [16] | 赵云振;党庆波.硬质合金刀具断续切削破损原因的探讨[J].煤炭技术,1998(01) |
| [17] | 陶福春;云志新 等.硬质合金刀具断续切削切出破损原因的探讨[J].哈尔滨理工大学学报,1999,4(02) |
| [18] | 李淑娟,阴敬盛.端铣削刀齿切出过程解析[J].太原重型机械学院学报,2001(01):44-47. |
| [19] | Das M K;Tobias S A .The Pelation between the Stastic and the Dynamic Cutting of Metals[J].Int J Mach Tools Des Res,1967,7:63-69. |
| [20] | Nigm M M;Sadek M M;Tobias S A .Determination of Dynamic Cutting Coefficients from Steady State Cutting Data[J].International Journal of Machine Tool Design & Research,17:19-37. |
| [21] | D W Wu;C R Liu .An Analytical Model of Cutting Dynamics.Part 1:Model Building[J].Journal of Engineering For Industry,1985,107 |
| [22] | 黄斌;李兆前;艾兴.断续切削时动态切削力的研究[J].山东电力高等专科学校学报,1998:47-49. |
| [23] | Boston O W;Gillbert W W .Influence on Tool Life and Power of Nose Radius,Charmfer,and Peripheral～Cutting Edge Angle When Face-Milling a 4000-psi Cast Iron[J].Transactions of the ASME,1947,69:117-124. |
| [24] | Zorev N N .Machine Steel with a Carbide-Tripped Tool in Interrupted Heavy-Cutting Conditions[J].Russian Eng J,1963,43(02):43-47. |
| [25] | Hoshi T;Okushima K .Tool Fracture in Face Milling Operation[J].Annals of CIRP,1967,15:309. |
| [26] | Braiden P M;Dugdale D S.Failure of Carbide Tools in Intermittent Cutting[A].Scaiborough,1970 |
| [27] | Bhatia S M;Pandey P C .Thermal Cracking of Carbide Tools During Intermittent Cutting[J].Wear,1978,51(02):210-211. |
| [28] | Wu H;Mayer J E .Analysis of Thermal Cracking of Carbide Tools in Intermittent Cutting[J].Journal Engineering for Industry Transactions of the ASME,1979,101(02):159-164. |
| [29] | Kunio Uehara .Fundamental Approach to the Thermal Crack of Cermet Cutting Tools[J].Annals of the CIRP,1981,30(01):47-51. |
| [30] | Chakraverti G;Pandey P C.Thermal Cracking of Carbide Tools during Interrupted Cutting[J].Japanese Soc of Precision Engineering,1984:209-214. |
| [31] | KaKino Yoshiaki;Shoda Minpei.Study on the Generation of Thermal Crack of Cutting Tool[J].Japanese Soc of Precision Engineering,1984:161-166. |
| [32] | Wang Z Y;Sahay C .Tool Temperature and Crack Development in Milling Cutters[J].Internation Journal of Machine Tools and Manufacture,1996,36(01):129-140. |
| [33] | 李澎东;刘国新;于彦波 .断续切削中的刀具热破损[J].哈尔滨科学技术大学学报,1992,16(01):14-20. |
| [34] | 尤显卿 .GJW35钢结硬质合金热疲劳裂纹萌生初步探讨[J].硬质合金,1999,16(02):71-74. |
| [35] | 尤显卿.GJW35钢结硬质合金热疲劳裂纹扩展的观察[J].硬质合金,2000(02):92-95. |
| [36] | 斯庭智,刘宁,尤显卿,冯建平.Al2O3基复合陶瓷抗热震研究[J].硬质合金,2003(04):237-241. |
| [37] | 谭光宇,刘广军,李振加,刘美娟,李广慧,融亦鸣.复杂槽型铣刀片三维温度场分析及其模糊综合评价[J].机械工程学报,2004(03):106-110. |
| [38] | 师汉民.金属切削理论及其应用新探[M].武汉:华中科技大学出版社,2003 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%