以高温盐浴法对金刚石表面进行镀硅处理来改善金刚石和铝基之间的界面结合,镀硅后的金刚石颗粒表面略显粗糙,表面的镀层均匀;采用真空热压烧结法制备高导热镀硅金刚石/铝复合材料,研究了烧结温度和金刚石体积分数对复合材料相对密度和热导率的影响.随着金刚石体积分数的增加,复合材料的相对密度和热导均呈现先升后降的趋势,当金刚石体积分数为45％时,复合材料的热导率达到最大,为558 W/mK.
参考文献
| [1] | Carl Zweben.ELECTRONIC PACKAGING MATERIALS[J].Advanced Materials & Processes,200510(10):33-37. |
| [2] | 童震松;沈卓身.金属封装材料的现状及发展[J].电子与封装,2005(3):6-15. |
| [3] | 张昊明;何新波;沈晓宇;刘谦;曲选辉.放电等离子烧结制备非连续石墨纤维/Cu复合材料[J].粉末冶金材料科学与工程,2012(3):339-344. |
| [4] | 项东;李木森;许斌;刘科高.镀覆金刚石技术的研究进展[J].超硬材料工程,2006(03):44-49. |
| [5] | 许尧;薛鹏举;魏青松;史玉升.热压烧结制备石墨/铜复合材料的热性能研究[J].热加工工艺,2013(12):111-114. |
| [6] | 梁雪冰;褚克;贾成厂.放电等离子烧结制备Diamond/Al复合材料[J].复合材料学报,2008(6):192-197. |
| [7] | YANG Bo;YU Jia-kang;CHEN Chuang.Microstructure and thermal expansion of Ti coated diamond/Al composites[J].中国有色金属学报（英文版）,2009(05):1167-1173. |
| [8] | O. Beffort;F.A. Khaltd;L. Weber.Interface formation in infiltrated Al(Si)/diamond composites[J].Diamond and Related Materials,20069(9):1250-1260. |
| [9] | P.W. Ruch;O. Beffort;S. Kleiner.Selective interfacial bonding in Al(Si)-diamond composites and its effect on thermal conductivity[J].Composites science and technology,200615(15):2677-2685. |
| [10] | Andrey M. Abyzov;Sergey V. Kidalov;Fedor M. Shakhov.High thermal conductivity composite of diamond particles with tungsten coating in a copper matrix for heat sink application[J].Applied thermal engineering: Design, processes, equipment, economics,2012:72-80. |
| [11] | 冯号;于家康;薛晨;马明辉.电子封装用金刚石/铝复合材料的显微组织与热膨胀性能[J].热加工工艺,2010(14):59-62. |
| [12] | Zhanqiu Tan;Zhiqiang Li;Genlian Fan;Qiang Guo;Xizhou Kai;Gang Ji;Lanting Zhang;Di Zhang.Enhanced thermal conductivity in diamond/aluminum composites with a tungsten interface nanolayer[J].Materials & design,2013May(May):160-166. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%