欢迎登录材料期刊网

材料期刊网

高级检索

以SnCl2·2H2O和Ce2(CO3)3·8H2O为原料,氨水为沉淀剂,采用湿固相机械化学法制备了不同比例的锡铈复合氧化物.研究了煅烧温度和反应物配比对最终产物相组成和粒度大小的影响,并分别评价了用于K9、ZF7玻璃的抛光性能.结果表明,复合氧化物的主晶相为立方萤石型氧化铈,次晶相为二氧化锡.随煅烧温度从800℃升高到1000℃,合成产物的结晶度提高,但抛光速率并不随之提高.具有抛光增强效果的复合氧化物是在800℃煅烧温度下合成的锡复配量超过50%的复合氧化物.达到最好抛光效果所需的Sn:Ce的量之比与抛光玻璃有关,ZF7玻璃为5:5,K9玻璃为6:4.

参考文献

[1] 徐进,雒建斌,路新春,张朝辉,潘国顺.超精密表面抛光材料去除机理研究进展[J].科学通报,2004(17):1700-1705.
[2] 江瑞生 .集成电路多层结构中的化学机械抛光技术[J].半导体技术,1998,23(01):6-9.
[3] Sorooshian A;Ashwani R;Choi H K .Effect of particle interaction on agglomeration of silica-based CMP slurries[J].Materials Research Society Symposium Proceedings,2004,816:125-131.
[4] Lei H;Luo J B .CMP of hard disk substrate using a colloidal SiO2 slurry:preliminary experimental investigation[J].WEAR,2004,257:461-470.
[5] 超细氧化铝抛光液的制备及其抛光特性研究[J].功能材料,2005(09):1425-1428.
[6] 李霞章,陈杨,陈志刚,陈建清,倪超英.纳米CeO2颗粒的制备及其化学机械抛光性能研究[J].摩擦学学报,2007(01):1-5.
[7] JindalA;Hegde S;Babu S V .Chemical-mechanical polishing using mixed abrasive slurries[J].Electrochemical and Solid-State Letters,2002,5:G48-G50.
[8] Feng XD;Sayle DC;Wang ZL;Paras MS;Santora B;Sutorik AC;Sayle TXT;Yang Y;Ding Y;Wang XD .Converting ceria polyhedral nanoparticles into single-crystal nanospheres[J].Science,2006(5779):1504-1508.
[9] 雷红,张泽芳.氧化铝/聚甲基丙烯酸复合粒子的抛光性能[J].微细加工技术,2008(01):45-48.
[10] Yong-Jin Seo;Woo-Sun Lee;Pochi Yeh .Improvements of oxide-chemical mechanical polishing performances and aging effect of alumina and silica mixed abrasive slurries[J].Microelectronic engineering,2004(4):361-366.
[11] Wang LY;Zhang KL;Song ZT;Feng SL .Chemical mechanical polishing and a succedent reactive ion etching processing of sapphire wafer[J].Journal of the Electrochemical Society,2007(3):H166-H169.
[12] Sung-Woo Park;Yong-Jin Seo;Woo-Sun Lee .A study on the chemical mechanical polishing of oxide film using a zirconia (ZrO_2)-mixed abrasive slurry (MAS)[J].Microelectronic engineering,2008(4):682-688.
[13] Armini, S;Whelan, CM;Moinpour, M;Maex, K .Mixed organic/inorganic abrasive particles during oxide CMP[J].Electrochemical and solid-state letters,2008(7):H197-H201.
[14] 傅毛生,李永绣,邓苏君,胡建东.纳米CeO2及其复合氧化物的制备方法研究进展[J].材料导报,2008(08):44-47,56.
[15] Liangyong Wang;Kailiang Zhang;Zhitang Song;Songlin Feng .Ceria concentration effect on chemical mechanical polishing of optical glass[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2007(11):4951-4954.
[16] 陈杨,隆仁伟,陈志刚,丁建宁.核-壳结构PS/CeO_2复合磨料的制备及其氧化物化学机械抛光性能[J].摩擦学学报,2010(01):9-14.
[17] 肖保其,雷红.纳米SiO2/CeO2复合磨粒的制备及其抛光特性研究[J].摩擦学学报,2008(02):103-107.
[18] 危亮华,傅毛生,李艳花,周雪珍,周新木,焦晓燕,李永绣.氯化钠和六偏磷酸钠对氧化铈抛光ZF7玻璃的协同增强作用[J].过程工程学报,2008(06):1241-1244.
[19] 傅毛生,李永绣,陈伟凡,危亮华,胡建东.Ce0.8Zr0.2O2固溶体磨料对ZF7光学玻璃抛光性能的改善[J].摩擦学学报,2009(02):180-185.
[20] Fu M S;Wei L H;Li Y H et al.Surface charge tuning of ceria particles by titanium doping:Towards significantiy improved polishing performance[J].Solid State Sciences,2009,11:2133-2137.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%