化学镀铜技术主要用作印制线路板孔金属化和塑料电镀,其镀层具有良好的延展性、导热性和导电性.介绍了化学镀铜的应用范围与发展.强调了化学镀铜预处理的必要性及要注意的几个方面:应用易清洗的油脂作防锈剂,低碳钢件用阳极电解除油,酸洗除油与碱性除油互补等.介绍了化学镀铜的一些常用体系及其主要组分.讨论了添加剂的影响.对非金属表面化学镀铜的研究进展进行了报道.提出了化学镀铜今后的研究重点.
参考文献
| [1] | 胡光辉,连锦明,杨防祖,林昌健.陶瓷基上化学镀铜[J].电镀与涂饰,2001(02):1-4. |
| [2] | 高俊丽.化学沉积法制备高分子复合导电微球[J].电镀与精饰,1998(04):1. |
| [3] | Rohan JR.;O'Riordan G.;Boardman J. .Selective electroless nickel deposition on copper as a final barrier/bonding layer material for microelectronics applications[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2002(3/4):289-297. |
| [4] | 夏传义;刘东卫 .陶瓷电路基板的新型金属化技术[J].半导体情报,1994,31(04):43-44. |
| [5] | FrancisJnuzzi .Accelerating the Rate of Electroles Copper Plating[J].Plating and Surface Finishing,1998,73(01):46-52. |
| [6] | Honama H;Kobayashi .Electroless Copper Deposition Presence Using Glyoxylic Acidasa Reducing Agent[J].Electrochen Soc,1994,141(03):24-25. |
| [7] | Mizumoto S;NaWa Tune H .Mechanical Properties of Copper Deposits from Eletroless,Plating Baths Containing Glycine[J].Journal of the Electrochemical Society,1986,76(12):39-42. |
| [8] | KondoK;Shikawall .Electroless Copper Plating in the Pressence of Excesss Trethanol Amine[J].Journal of the Electrochemical Society,1990,137(06):55-57. |
| [9] | 战余英;王德荣 .直接氧化法化学镀铜液的稳定问题[J].电镀与环保,1984,11(02):64-72. |
| [10] | 赵文轸.金属材料表面新技术[M].西安:西安交通大学出版社,1992:76-81. |
| [11] | 赵斌;宋元伟;冯华东 .化学镀铜层的表面处理[J].华东理工大学学报(自然科学版),1998,24(05):585-589. |
| [12] | 詹益腾.镀前处理的改进[J].材料保护,2000(04):12-13. |
| [13] | 伍学高;李铭华.化学镀技术[M].成都:四川科学技术出版社,1985:23-27. |
| [14] | 姜晓霞;沈伟.化学镀理论与实践[M].北京:国防工业出版社,2000:104-109. |
| [15] | 赵斌;方晓;毛德芳 .化学镀铜新工艺[J].华东理工大学学报(自然科学版),1997,23(03):367-371. |
| [16] | 郭忠诚;刘鸿康;王志英 等.化学镀层的应用现状与展望[J].表面技术,1995,24(06):1-7. |
| [17] | HajduJ .Electroless plating[J].Plating and Surface Finishing,1996,83(09):29-33. |
| [18] | 董超.添加剂对化学镀铜的影响[J].材料保护,1997(01):8. |
| [19] | 申顺保 .高稳定性酒石酸盐化学镀铜[J].电镀与环保,1990,19(03):44-48. |
| [20] | Matsuoka M.;Iwakura C.;Yoshida Y. .THE EFFECTS OF AERATION AND ACCUMULATION OF CARBONATE IONS ON THE MECHANICAL PROPERTIES OF ELECTROLESS COPPER COATINGS[J].Journal of the Electrochemical Society,1995(1):87-91. |
| [21] | Mizumoto S;Shin Horing Yeh;Jhy Yeong Gan et al.The Effect of Organic Additives on a CuO Electroless Copper Bath[J].Plating and Surface Finishing,1986,73(12):48-1. |
| [22] | Bindra P;Van Den MeerakkerJE A M .Mechanism of electroless metal plating[J].Journal of the Electrochemical Society,1985,132(02):2581-2589. |
| [23] | Hung A;Paunovic M .Effects of thiourea guanidine hydrochloride on electroless copper plating[J].Journal of the Electrochemical Society,1985,132(04):1047-1049. |
| [24] | FrancisJN .Corrections - Assembly of Microtubule Protein:Role of Guanosine Di- and Triphosphate Nucleotides[J].Plating and Surface Finishing,1983,70(01):51-54. |
| [25] | Kondo K;Ishida N;IshikawaJ et al.Kinetiecs of electroless copper plating in the presence of excess triethanlolamine[J].Bulletin of the Chemical Society of Japan,1992,65(01):2380-2384. |
| [26] | 谷新,王周成,林昌健.络合剂和添加剂对化学镀铜影响的电化学研究[J].电化学,2004(01):14-19. |
| [27] | Sato N;Suzuki M .AC Impedance and Coulostatic Studies on Electrochemical Detection of 2-Mereaptobenzothiazale in a Copper Electroless Plating Bath[J].Journal of the Electrochemical Society,1988,135(07):1645-1647. |
| [28] | Veleva R;Okinaka Y;Straschil H K .Role of Potassium Ferrocyanide in Electroless Copper Baths[J].Journal of the Electrochemical Society,1986,29(02):87-88. |
| [29] | Okinaka Y;Nakahara S;Mak C Y .Structure of Electroless Nickel Coating[J].Plating and Surface Finishing,1993,80(03):60. |
| [30] | Nakahara S;Burke L D;Okinaka Y .An investigation of the anodic behavior of copper and its anodically produced oxides in aqueous solutions of high pH[J].Journal of the Electrochemical Society,1990,138(05):1421-1424. |
| [31] | Kou S C;Zeblisky R .Deposition Rate and Morphology of Electroless Copper Film from Solutions Containing 2,2-dipyridyl[J].Plating and Surface Finishing,2003,90(03):44-47. |
| [32] | Nuzzi FJ .Accelerating the rate of electroless copper plating[J].Plating and Surface Finishing,1983,70(01):51-54. |
| [33] | Kondo K;Ishida N;IshikawaJ et al.Kinetiecs of electroless copper plating in the presence of excess triethanlolamine[J].Bulletin of The Chemical Society of Japan,1995,139(09):2466-2470. |
| [34] | S.-C. Kou;A. Hung .Effect of Buffer On Electroless Copper Deposition[J].Plating & Surface Finishing,2002(2):48-52. |
| [35] | 宋元伟,赵斌.添加剂对化学镀铜层机械性能的影响[J].化学世界,2000(01):13-18. |
| [36] | Zhao X Ch;Guo Q L;Deng Q S.Study on the new technique of Cu microplating based on ceramics[A].,2003:G25. |
| [37] | C.T. Pan .Selective electroless copper plating micro-coil assisted by 248 nm excimer laser[J].Microelectronic engineering,2004(3/4):242-251. |
| [38] | 续振林,郭琦龙,沈艺程,赵雄超,洪艳萍,辜志俊.陶瓷表面无敏化活化法微细化学镀铜[J].电化学,2005(02):193-198. |
| [39] | 李瑞海,顾宜.聚苯乙烯塑料表面化学镀铜的研究[J].高分子材料科学与工程,2004(05):208-210,214. |
| [40] | 罗朝晖;朱家琪;黄泽恩 .木材/金属复合材料的研究[J].木材工业,2000,14(06):25-27. |
| [41] | 周杲,赵广杰.木材表面化学镀处理技术[J].木材工业,2005(03):8-11. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%