电解抛光技术研究进展

电镀与涂饰 , 2007, 26(2): 48-53. doi: 10.3969/j.issn.1004-227X.2007.02.014

电解抛光技术研究进展

张素银 ^1, , 杜凯 ^2, , 谌加军 ^3, , 詹勇军 ^4, , 曾体贤 ^5,

1.西华师范大学物理与电子信息学院,四川,南充,637002;中国工程物理研究院激光聚变研究中心,四川,绵阳,621900

2.中国工程物理研究院激光聚变研究中心,四川,绵阳,621900

3.西华师范大学物理与电子信息学院,四川,南充,637002

4.西华师范大学物理与电子信息学院,四川,南充,637002;中国工程物理研究院激光聚变研究中心,四川,绵阳,621900

5.西华师范大学物理与电子信息学院,四川,南充,637002

基金项目: 国家高技术研究发展计划(863计划)

关键词：电解抛光 , 原理 , 粗糙度 , 影响因素

Research progress of electropolishing technology

介绍了电解抛光技术的研究现状、特点及抛光原理,分析了工件表面粗糙度的主要影响因素.指出了电解抛光技术存在的问题.

参考文献

[1]	胡拥军 .铝的碱性电解抛光工艺研究[D].中南大学,2002.
[2]	马胜利;葛利玲 .电化学抛光机制研究与进展[J].表面技术,1998,27(04):1-3.
[3]	王建武,杨红忠.电解抛光制备钼制品金相试样的应用[J].中国钼业,2005(02):47-49.
[4]	李广武 .不锈钢表面着色与电化学抛光工艺的研究[D].山东大学,2005.
[5]	D. Landolt;P. -F. Chauvy;O. Zinger .Electrochemical micromachining, polishing and surface structuring of metals: fundamental aspects and new developments[J].Electrochimica Acta,2003(20/22):3185-3201.
[6]	C. W. LIN;S. Y. DING;Y. W. HWANG .Interfacial crystallization of isotactic polypropylene molded against the copper surface with various surface roughnesses prepared by an electrochemical process[J].Journal of Materials Science,2001(20):4943-4948.
[7]	许崇波 .超音速火焰喷涂层电解抛光研究[D].广东工业大学,2005.
[8]	李广武,赵芳,井涛.不锈钢电抛光工艺的研究[J].电镀与环保,2005(02):27-29.
[9]	Shuo-Jen Lee;Yu-Ming Lee;Ming-Feng Du .The polishing mechanism of electrochemical mechanical polishing technology[J].Journal of Materials Processing Technology,2003(1/3):280-286.
[10]	Cai Z;Shafer T;Watanabe I;Nunn ME;Okabe T .Electrochemical characterization of cast titanium alloys.[J].Biomaterials,2003(2):213-218.
[11]	沈健,牛志强,张海岩,沈毅斌.模具45#钢电化学抛光电解液的选择[J].表面技术,2002(05):45-46,56.
[12]	马胜利,井晓天,葛利玲.纯金材料电化学抛光工艺研究[J].稀有金属材料与工程,2000(04):276-278.
[13]	王建业;徐家文.电解加工原理及应用[M].北京:国防工业出版社,2001
[14]	J.J. Sun;E.J. Taylor;R. Srinivasan .MREF-ECM process for hard passive materials surface finishing[J].Journal of Materials Processing Technology,2001(3):356-368.
[15]	郭贤烙,易翔.不锈钢电化学抛光技术研究[J].电镀与涂饰,2001(05):11-13.
[16]	焦树强,周海晖,陈金华,旷亚非.铝及铝合金的表面抛光[J].电镀与涂饰,2001(06):32-35.
[17]	O. Piotrowski;C. Madore;D. Landolt .Electropolishing of tantalum in sulfuric acid-methanol electrolytes[J].Electrochimica Acta,1999(19):3389-3399.
[18]	E.P.Grishina;S.I.Galanin;O.A.Ivanova .Fundamental Aspects of Film Formation in Electrochemical Polishing of Silver and Silver-Copper Alloys in Thiosulfate Solutions[J].Russian journal of applied chemistry,2004(8):1283-1286.
[19]	HUI ZHAO;JAN VAN HUMBEECK;JUERGEN SOHIER;IVAN DE SCHEERDER .Electrochemical polishing of 316L stainless steel slotted tube coronary stents[J].Journal of Materials Science. Materials in Medicine,2002(10):911-916.
[20]	LEE P J.Enhanced control of electropolishing for the preparation of thin foils for transmission electron microscopy:artificial and multiple phase micro-electropolishing[J].Microscopy & Microanalysis,1996(357):1028-1029.
[21]	H. Hocheng;P. S. Pa .Effective Form Design of Electrode in Electrochemical Smoothing of Holes[J].The International Journal of Advanced Manufacturing Technology,2003(12):995-1004.
[22]	Leonardo S. Andrade;Sandro C. Xavier;Romeu C. Rocha-Filho;Nerilso Bocchi;Sonia R. Biaggio .Electropolishing of AISI-304 stainless steel using an oxidizing solution originally used for electrochemical coloration[J].Electrochimica Acta,2005(13):2623-2627.
[23]	Chen CC;Chen JH;Chao CG;Say WC .Electrochemical characteristics of surface of titanium formed by electrolytic polishing and anodizing[J].Journal of Materials Science,2005(15):4053-4059.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

电解抛光技术研究进展

Research progress of electropolishing technology

参考文献