电极烧损是铝合金电阻点焊工艺当中存在的主要问题之一,它严重限制了该工艺的推广和应用,也是铝合金电阻点焊研究中的难点问题.以实验为基础从多个角度探讨了铝合金电阻点焊时电极发生烧损的机理及其影响因素.结果表明,铝合金点焊中电极的烧损是由于接触面上的局部高温熔化和铜铝之间的接触反应两方面因素共同作用的结果,电极烧损所形成的合金组织是以CuAl2为主的金属间化合物.为进一步解决电极烧损问题提供了一些理论依据.
参考文献
[1] | Patrick E P.Understanding the process mechanisms is key to reliable resistance spot welding aluminum auto body components[M].SAE Trans 1984 No:840281:2435-2448. |
[2] | Kucza J C et al.Aluminum as-rolled sheet for automotive applications-effect of surface oxide on resistance spot welding and adhesive bonding behavior[J].SAE Transactions,1997,970013:15-26. |
[3] | 蒙多尔福·L·F;王祝堂.铝合金的组织与性能[M].北京:冶金工业出版社,1988 |
[4] | Ulrich Dilthey.Metallographic investigations into wear processes of electrodes during the resistance spot welding of aluminum[J].Welding and Cutting,1998(01):34-40. |
[5] | 王国忠;范富华.接触反应钎焊微观过程初步研究[A].哈尔滨,1993 |
[6] | 程方杰 .铝合金点焊中的接触电阻与电极烧损问题的研究[D].天津大学,2001. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%