进行了典型高速破片对半无限厚45号钢靶侵彻试验,并根据Tate-Alekseevskii弹体侵彻模型及理想刚塑性材料模型假定,推导了高速破片冲击下,半无限厚钢靶的侵彻深度计算公式,提出了靶体的抗侵彻阻力以及靶体材料动态屈服强度的计算方法,计算侵彻深度与试验结果吻合良好.结果表明:半无限厚45号钢靶的抗侵彻阻力约为5.246倍静态屈服强度;在平面应变侵彻条件下,当弹速为500～1300m/s时,45号钢的动态屈服强度约为静态屈服强度的2.998倍;弹体的临界侵彻速度为319.9 m/s,冲击速度小于临界侵彻速度时不会发生侵彻.
参考文献
| [1] | Ministry of Defence .The Ballistic Testing of Fragment Protective Personnel Armours and Materials[P].UK SC 4697,1981. |
| [2] | Ballistic test method for personal armours[S].Draft STANAG,1991. |
| [3] | 梅志远,朱锡,张立军.高速破片穿透船用钢靶剩余特性研究[J].工程力学,2005(04):235-240. |
| [4] | Tate A .A theory for the deceleration of long rods after impact[J].Journal of the Mechanics and Physics of Solids,1967,15:387-399. |
| [5] | Tate A .Further results in the theory of long rod penetration[J].Journal of the Mechanics and Physics of Solids,1969,17:141-150. |
| [6] | Anderson C E;Walkwer J D;Anderson C E;Walkwer J D .An examination of long-rod penetration[J].International Journal of Impact Engineering,1991,11:481-501. |
| [7] | R. Zaera;V. Sanchez-Galvez .Analytical modelling of normal and oblique ballistic impact on ceramic/metal lightweight armours[J].International journal of impact engineering,1998(3):133-148. |
| [8] | Dikshit S N;Kutumbarao V V;Sundararajan G .The influence of plate hardness on the ballistic penetration of thick steel plates[J].International Journal of Impact Engineering,1995,16(02):293-320. |
| [9] | 余同希;斯壮W J.塑性结构的动力学模型[M].北京:北京大学出版社,2002:12-15. |
| [10] | 钱伟长.穿甲力学[M].北京:国防工业出版社,1984:22-23. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%