湿法成形陶瓷料浆研究进展

兵器材料科学与工程 , 2007, 30(1): 66-71. doi: 10.3969/j.issn.1004-244X.2007.01.020

湿法成形陶瓷料浆研究进展

张云龙 ^1, , 张宇民 ^2, , 赵晓静 ^3, , 韩杰才 ^4,

1.哈尔滨工业大学,复合材料与结构研究所,黑龙江,哈尔滨,150001

2.哈尔滨工业大学,复合材料与结构研究所,黑龙江,哈尔滨,150001

3.哈尔滨工业大学,复合材料与结构研究所,黑龙江,哈尔滨,150001

4.哈尔滨工业大学,复合材料与结构研究所,黑龙江,哈尔滨,150001

基金项目: 国家自然科学基金(90205034)

关键词：陶瓷料浆 , 湿法成形 , 预处理 , 表面改性 , 分散剂

Research development of ceramics slurry in the wet forming process

就陶瓷粉体分散机理、料浆分散的主要影响因素以及最新研究进展等方面进行综述,重点讨论陶瓷料浆稳定分散的诸多影响因素,如陶瓷粉体原料性质、预处理、外加剂等等,同时也指明采用湿法成形技术的发展趋势.

参考文献

[1]	Omatet O O et al.Gel-casting a new ceramic forming process[J].Ceramic Bulletin,1991,70(10):1642-1649.
[2]	Marco A D et al.Slip casting of submicron BaTiO3,produced by low temperature aqueous synthesis[J].Journal of the European Ceramic Society,1996,16:975-984.
[3]	Ali Akbar Babaluo et al.Chemorheology of alumina aqueous acrylamide gelcasting systems[J].Journal of the European Ceramic Society,2004,24:635-644.
[4]	Stanley Rendon;Wesley R.Burghardt;Robert A.Bubeck;Lowell S.Thomas;Bruce Hart .Mechanical and morphological anisotropy in injection molding of thermotropic liquid crystalline copolyesters[J].Polymer: The International Journal for the Science and Technology of Polymers,2005(23):10202-10213.
[5]	Guo L .Adsorption effects on rheological properties of aqueous alumina suspensions with poly electrolyte[J].Journal of The American Chemical Society,1998,81(03):549-556.
[6]	Ramakrishnan V.;Malghan SG.;Pradip. .The stability of alumina-zirconia suspensions[J].Colloids and Surfaces, A. Physicochemical and Engineering Aspects,1998(1/2):135-142.
[7]	Marta I.L.L. Oliveira;Kexin Chen;Jose M.F. Ferreira .Influence of powder pre-treatments on dispersion ability of aqueous silicon nitride-based suspensions[J].Journal of the European Ceramic Society,2001(13):2413-2421.
[8]	Hackley V A .Colloidal processing of silicon nitride with polyacrylic acid:rheological properties[J].Journal of The American Chemical Society,1998,81(03):2421-2428.
[9]	Zhien-chi et al.Stabilization and processing of aqueous BaTiO3 suspension with poly acrylic acid[J].Journal of the American Chemical Society,1992,75(12):3201-3208.
[10]	J.X. Zhang;D.L. Jiang;S.H. Tan .Aqueous processing of SiC green sheets I: Dispersant[J].Journal of Materials Research,2002(8):2012-2018.
[11]	王瑞刚,吴厚政,陈玉如,杨正方.陶瓷料浆稳定分散进展[J].陶瓷学报,1999(01):35-40.
[12]	周祖康.胶体化学基础[M].,1987:656-690.
[13]	孙静,高濂,郭景坤.SiC粉体表面性质及其浆料流变性质研究[J].无机材料学报,2000(03):426-430.
[14]	易中周,黄勇,谢志鹏,马景陶.碳化硅浓悬浮体的分散特性和流变性研究[J].硅酸盐学报,2002(04):517-520.
[15]	刘学建,黄莉萍,古宏晨,张兆泉,符锡仁.表面改性对氮化硅浆料固含量的影响[J].无机材料学报,2000(01):150-154.
[16]	Huang Yong.Effect of ion conductance on the preparation of concentrated suspension of ceramics[A].Austrilia,1996:7.
[17]	杨金龙等.Si3N4陶瓷粉体中可溶性离子对悬浮体固相含量的影响[J].硅酸盐学报,1997,25(06):679-687.
[18]	Larz E et al.Aqueous Si3N4 suspensions:influence of surface treatment on rheological and electrokinetics properties[J].Key Engineering Materials,1997,12:132-136.
[19]	Liu X J .Influence of acid cleaning on rheological behavior of silicon nitride aqeous suspension[J].J Mate Sci Letter,2000,19(03):177-178.
[20]	Dai J Q .Influence of acid cleaning and calcination on rheological properties of concentrated aqueous suspensions of silicon nitride powder[J].Journal of The American Chemical Society,2002,85(02):293-298.
[21]	周龙捷,许兴利,黄勇,谢志鹏.水基高固相含量SiC悬浮体的制备和凝胶注模成型[J].高技术通讯,2000(07):100-103.
[22]	Li, W;Cheng, P;Gu, MY .Influence of surface cleaning and calcination on rheological properties of silicon carbide aqueous suspensions[J].Journal of the American Ceramic Society,2005(5):1145-1149.
[23]	武七德 .表面包覆改性技术在陶瓷技术中的应用[J].现代技术陶瓷,2000,21(04):18-29.
[24]	Hidehiro Kamiya;Yoshiyuki Fukuda;Yoshio Suzuki;Mayumi Tsukada;Toshio Kakui;Makio Naito .Effect of polymer dispersant structure on electrosteric interaction and dense alumina suspension behavior[J].Journal of the American Ceramic Society,1999(12):3407-3412.
[25]	Celine et al.Rheological behaviour of colloidal dispersions of hydrophobic particle stabilized in water by amphilic poly electrolytes[J].Colloids and Surfaces,1999,15(02):251-261.
[26]	孙静,孙伟燕,高濂,郭景坤.聚乙烯亚胺在 SiC粉体上的定量吸附研究[J].无机材料学报,2000(02):259-263.
[27]	Hidber PC.;Gauckler LJ.;Graule TJ. .CITRIC ACID - A DISPERSANT FOR AQUEOUS ALUMINA SUSPENSIONS[J].Journal of the American Ceramic Society,1996(7):1857-1867.
[28]	Zhang J X et al.The dispersion of SiC in aqueous media with Al2O3 and Y2O3 as sintering additives[J].Journal of The American Chemical Society,2005,88(04):1013-1016.
[29]	唐学原,茹红强.SiC陶瓷浆料流变性能的研究[J].厦门大学学报(自然科学版),2004(04):527-530.
[30]	李玮,顾明元,金燕萍.分散剂用量对碳化硅浆料流变性能的影响[J].硅酸盐学报,2004(11):1356-1360.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

湿法成形陶瓷料浆研究进展

Research development of ceramics slurry in the wet forming process

参考文献