基于两种不同成分、两种不同热处理状态的亚共析钢的帽型试样强迫剪切实验,在Hopkinson压杆的不同速度加载条件下,研究了材料动态响应的微结构特征,分析了铁素体含量对绝热剪切的影响规律.结果表明,随着铁素体含量的减少,剪切带宽度越窄,绝热剪切越敏感.
参考文献
[1] | Zener C;Hollomon J H .Effect of strain rate upon plastic flow of steel[J].Journal of Basic Engineering,Transactions of the ASME,1944,15(01):22-32. |
[2] | Murr L E;Staudhammer K P;Meyers M A et al.Metallurgical applications of shock-wave and high-strain-rate phenomena[J].Metallograghy,1987,20(02):249-250. |
[3] | M.A. MEYERS;Y.-J. CHEN;F.D.S. MARQUIS .High Strain, -High-Strain-Rate Behavior of Tantalum[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1995(10):2493-2501. |
[4] | MARC A. MEYERS;UMBERTO R. ANDRADE;ATUL H. CHOKSHI .The Effect of Grain Size on the High-Strain, High-Strain-Rate Behavior of Copper[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1995(11):2881-2893. |
[5] | Wright T W;Ockendon H .A model for fully formed shear bands[J].J Mech Plays Solids,1992,40(06):1217-1230. |
[6] | Wright T W;Ockendon H .A scaling law for the effect of inertia on the formation of adiabatic shear bands[J].International Journal of Plasticity,1996,12(07):927-934. |
[7] | A.Molinari .Collective behavior and spacing of adiabatic shear bands[J].Journal of the Mechanics and Physics of Solids,1997(9):1551-1576. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%