采用Gleeble-1500D热模拟机对Mg-Al-Zn-Nd稀土镁合金的变形规律及动态再结晶行为进行研究.结果表明:合金的流变应力随应变速率的增大而增加,随温度的升高而降低;变形量对应力-应变关系的影响很小;变形过程中发生动态再结晶,随变形程度的增加,动态再结晶晶粒不断增多,材料呈现明显的软化趋势,流动应力下降.当动态再结晶过程完成以后,继续变形,材料又出现硬化行为;并且动态再结晶平均晶粒尺寸的自然对数与Zener-Hollomon参数的自然对数呈线性关系.根据实验分析,合金适宜的热加工条件为:变形温度400~450℃,应变速率0.1~5 s-1.
参考文献
[1] | Cahn R W;师昌绪;柯俊.非铁合金的结构与性能[M].北京:科学出版社,1999:101. |
[2] | Jaschik C;Haferkam H;Niemeyer M.New magnesium wrought alloys[A].Germany,2000:41-46. |
[3] | LI Yi-zhen;WANG Qu-dong;ZENG Xiao-qin et al.Effect of rare earths on the microstructure,properties and fracture behavior of Mg-Al alloys[J].Materials Science and Engineering A,2000,278(01):66-76. |
[4] | 吴安如,夏长清,戴晓元.镁-稀土合金热变形特点及挤压参数的确定[J].稀有金属材料与工程,2006(01):100-104. |
[5] | Petterson G;Westengen H;Hepier R.Microstructure of pressure die cast Mg-4%Al alloy modifided with rare earth additions[J].Materials Science and Engineering,1996(01):115-120. |
[6] | 刘斌,刘顺华,金文中.稀土在镁合金中的作用和影响[J].上海有色金属,2003(01):27-31. |
[7] | Barnett M R.Inflluence of deformation conditions and texture on the high temperature flowstress of magnesium AZ31[J].Journal of Light Metals,2001(01):167-177. |
[8] | Ion S E;Hunphreys F J;White S H .Dynamic recrystallisation and the development of microstructure during.the high temperature deformation of magnesium[J].Acta Materials,1982,30:1909-1919. |
[9] | 卡恩 R W;雷廷权.材料科学与技术丛书第15卷:金属与合金工艺[M].北京:科学出版社,1999:408-414. |
[10] | Luo A;Pekguleryuz M O .Review cast magnesium alloys for elevated temperature application[J].Journal of Materials Science,1994,29(20):5295-5271. |
[11] | Watanabe H;Tsutsui H et al.Grain size control of commercial wrough Mg-Al-Zn alloys utilizing dynamic recrystallization[J].Materials Transactions,2001,42:1200-1205. |
[12] | 汪凌云,黄光胜,范永革,黄光杰.变形AZ31镁合金的晶粒细化[J].中国有色金属学报,2003(03):594-598. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%