利用Hopkinson压杆装置(SHPB)和SEM等研究室温下经过不同工艺处理的Zr基非晶合金/W丝复合材料的动态力学性能及断裂模式.结果表明,由工艺4制备的复合材料具有最好的动态压缩性能,在0.8 MPa打击压力下,其动态抗压强度达到3 965 MPa.该复合材料动态压缩断裂模式为混合断裂模式,包括剪切断裂和纵向开裂,W丝呈现劈裂和屈曲特征.
参考文献
| [1] | A.Inoue .Stabilization of metallic supercooled liquid and bulk amorphous alloys[J].Acta materialia,2000(1):279-306. |
| [2] | Peker A;Johnson W L .A highly processable metallic glass:Zr41.2Ti13.6Cu12.5Nl10.0Be22.5[J].Applied Physics Letters,1993,63:2342-2344. |
| [3] | Gilbert CJ;Ritchie RO;Johnson WL .Fracture toughness and fatigue-crack propagation in a Zr-Ti-Ni-Cu-Be bulk metallic glass[J].Applied physics letters,1997(4):476-478. |
| [4] | Bruck H A;Christman T;Rosakis A J et al.Quasi-static constitutive behavior of Zr41.25Ti13.75Ni10Cu12.5Be22.5 bulk amorphous alloys[J].Scripta Metallurgica,1994,30:429-434. |
| [5] | H. CHOI-YIM;R. BUSCH;U. KOSTFR;W. L. JOHNSON .SYNTHESIS AND CHARACTERIZATION OF PARTICULATE REINFORCED Zr57Nb5Al10Cu15.4Ni12.6 BULK METALLIC GLASS COMPOSITES[J].Acta materialia,1999(8):2455-2462. |
| [6] | Dandliker R B;Conner R D;Johnson W L .Melt infiltration casting of bulk metallic-glass matrix composites[J].Journal of Materials Research,1998,13:2896-2901. |
| [7] | Hays CC.;Johnson WL.;Kim CP. .Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions[J].Physical review letters,2000(13):2901-2904. |
| [8] | Y.F. Xue;H.N. Cai;L. Wang .Dynamic compressive deformation and failure behavior of Zr-based metallic glass reinforced porous tungsten composite[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(0):275-280. |
| [9] | 邱克强,王爱民,张海峰,乔东春,丁炳哲,胡壮麒.钨丝增强ZrAlNiCuSi块体非晶复合材料及其塑性行为[J].金属学报,2002(10):1091-1096. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%