通过金相显微镜、扫描电子显微镜和透射电子显微镜的观察,对不同回火温度下40CrNi2Mo钢在弹丸侵彻下产生的绝热剪切带的微观特征进行研究.结果表明:此试验条件下的绝热剪切带宽为10~40μm,可分为过渡区和中心区;过渡区为严重形变后拉长的马氏体板条,而中心区发生了相变.形成了细小的等轴晶结构.
参考文献
[1] | X.W. Chen;Q.M. Li;S.C. Fan .Initiation of adiabatic shear failure in a clamped circular plate struck by a blunt projectile[J].International journal of impact engineering,2005(7):877-893. |
[2] | Odeshi AG;Al-ameeri S;Mirfakhraei S;Yazdani F;Bassim MN .Deformation and failure mechanism in AISI 4340 steel under ballistic impact[J].Theoretical and Applied Fracture Mechanics,2006(1):18-24. |
[3] | Y. Yang;B.F. Wang;B. Hu;K. Hu;Z.G. Li .The collective behavior and spacing of adiabatic shear bands in the explosive cladding plate interface[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):291-296. |
[4] | C.Z. Duan;M.J. Wang .Characteristics of adiabatic shear bands in the orthogonal, cutting of 30CrNi_3Mo V steel[J].Journal of Materials Processing Technology,2005(1):102-106. |
[5] | Jan Krejci;Josef Brezina;Jaroslav Buehar .On the substructure of adiabatic shear bands[J].Scripta Metallurgiea,1992,27:611-616. |
[6] | Wittman C L;Meyers M A;Pak H-r .Observation of an adiabatic shear band in AISI4340 steel by high-voltage transmission electron microseopy[J].Metallurgical Transactions,1990,21A(03):707-716. |
[7] | Zhang Baofa;shen Wanci;Liu Yingjie et al.Mierostruetures of surface white layer and internal white adiabatic shear band[J].Wear,1997,211:164-168. |
[8] | 董瀚;李桂芬;陈南平 .高强度钢巾绝热剪切带的组织和硬度[J].金属学报,1996,32(06):599-604. |
[9] | 时捷,董瀚,王琪,田亮.装甲钢板中绝热剪切带的特征[J].金属学报,2000(10):1045-1049. |
[10] | Rogers H C;Shastry C V.Shock waves and high-strain-rate phenomena in metals[M].New York:Plenum Press,1981:285-298. |
[11] | A. G. Odeshi;M. N. Bassim;S. Al-Ameeri .Effect of heat treatment on adiabatic shear bands in a high-strength low alloy steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):69-75. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%