采用先进的喷射沉积技术,研制一种高硅铝合金发动机缸套材料,并经过挤压加工、热处理、成形加工、摩擦学性能测试与摩擦学机制分析,最后在单缸机上装机试验.结果表明,高硅铝合金缸套材料具有良好的摩擦学性能,这归功于高硅铝合金中比钢、铸铁还硬的硬质点;在所测试的油耗、废气压力、磨损量以及排温等指标数据方面,比相应的铸铁缸套更具有优越性.
Baaed on international research and application of high-silicon aluminum alloy cylinder sleeve materials, a kind of high-silicon aluminum alloy cylinder sleeve material was developed by advanced spray forming technology. Then the material was treated by extrusion, heat treatment, machining, tribology test, tribology mechanism analysis, and finally was qualified by single-cylinder engine teat. The experiment results show that high-silicon aluminum alloy cylinder sleeve material has good tribology properties, which are attributed to hlgh-hardness particles which are harder than steel, cast iron. The high-silicon aluminum alloy cylinder sleeve material is more excellent than cast iron cylinder sleeve material in index testing of oil-consumption quantities, exhaust gas pressure, wearing quantities and gas temperature and so on.
参考文献
| [1] | 袁晓光;张淑英;徐达鸣.快速凝同耐磨高硅铝合金研究现状[J].材料导报,1996(02):10-15. |
| [2] | 杨伏良,甘卫平,陈招科.硅含量对高硅铝合金材料组织及性能的影响[J].材料导报,2005(02):98-100,105. |
| [3] | 熊柏青,张永安,石力开.喷射成形技术制备高性能铝合金材料[J].材料导报,2000(12):50-55. |
| [4] | 张永安,熊柏青,韦强,石力开,马鸣图.喷射成形制备高性能铝合金材料[J].机械工程材料,2001(04):22-25. |
| [5] | 王锋,杨滨,崔华,段先进,张济山,熊柏青,张永安.喷射沉积Al-Si-Ni-Cu-Mg合金的显微组织和相组成[J].特种铸造及有色合金,2000(04):1-3. |
| [6] | 甄子胜,赵爱民,毛卫民,孙峰,钟雪友.喷射沉积高硅铝合金显微组织及形成机理[J].中国有色金属学报,2000(06):815. |
| [7] | 敖炳秋.轻量化汽车材料技术的最新动态[J].汽车工艺与材料,2002(08):1-21,105. |
| [8] | 赖华清,范宏训,徐祥.过共晶铝硅合金的研究及应用[J].汽车工艺与材料,2001(10):21-24. |
| [9] | Warren H.;Hunt Jr. .NEW DIRECTIONS IN ALUMINUM-BASED P/M MATERIALS FOR AUTOMOTIVE APPLICATIONS[J].International Journal of Powder Metallurgy,2000(6):51-60. |
| [10] | Leatham A G;Ogilvy A J W;Elias L G.The osprey preform process and its application to light alloys and composites[J].P/M in Aerospace and Defense Technologies,1991(03):235-242. |
| [11] | Leatham A;Ogilvy A;Chesney P.Osprey Processproduction flexifility in materials manufacture[J].Metals and Materals,1989(03):140-144. |
| [12] | Singer A R E .The challenge of spray forming[J].Powder Metallurgy,1991,25(04):195-200. |
| [13] | Tokizane N;Ohkubo Y;Shibue K.Recent progress in spray forming of aluminium alloys[A].,1996:313-320. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%