论述一种适用于变体机翼的具有主动变形能力的波纹式柔性蒙皮基体制备方法,并制作了拉伸测试件,进行拉伸实验.实验结果显示,当伸长量小于4%时,蒙皮基体线性伸长,在此范围内.可利用蒙皮自身的弹性使其恢复到原始形状.测试基于形状记忆合金(SMA)驱动器的波纹式蒙皮的主动变形效果,给SMA驱动器通以电流,利用SMA的形状记忆效应驱动蒙皮基体变形,试验测试不同电流下基体伸长2%所需的时间,及利用自身弹力回复时的残余变形量,蒙皮基体自身产生的变形将大大降低变体机翼蒙皮变形时对驱动力的要求.
A preparation method of basal body for corrugated skin with active deformability,which was applicable to morphing wings,was introduced in this paper.The basal body specimens were made and the tensile test was performed.Test results show that the basal body elongates linearly as the increase of tensile force when the elongation indicator is less than 4%.Within this range,the basal body could recover to its original shape with the help of its own elastic force.The active deformability of the basal body for corrugated skin was tested basing on shape memory alloy(SMA)actuator.When current is applied to SMA,the basal body will be forced to deform due to the shape memory effect of SMA.The time consuming was measured when the elongation of basal body is 2% under different currents.And the residual deformation of the basal body,with the help of its own elastic force,was also measured.With the SMA actuator,the driving force for the deformation of morphing wing can be reduced significantly.
参考文献
| [1] | Rodriguez Armando R .Morphing aircraft technology survey.[AIAA,2007-1258][R]. |
| [2] | Jason Bowman;Brian Sanders;Bryan Cannon .Development of next generation morphing aircraft structures.[AIAA,2007-1730][R]. |
| [3] | 杨智春,解江.自适应机翼技术的分类和实现途径[J].飞行力学,2008(05):1-4,9. |
| [4] | Reich Gregory W;Sanders Brian .Development of skins for morphing aircraft applications via topology optimization.[AIAA,2007-1738][R]. |
| [5] | Olympio Kingnide R;Gandhi Farhan .Zero-v cellular honeycomb flexible skins for one-dimensional wing morphing.[AIAA,2007-1735.][R]. |
| [6] | JONATHAN D. BARTLEY-CHO;DONNY P. WANG;CHRISTOPHER A. MARTIN .Development of High-rate, Adaptive Trailing Edge Control Surface for the Smart Wing Phase 2 Wind Tunnel Model[J].Journal of Intelligent Material Systems and Structures,2004(4):279-291. |
| [7] | Prock Brian C;Weisshaar Terrence A;Crossley William A .Morphing airfoil shape change optimization with minimum actuator energy as an objective.[AIAA,2002-5401][R]. |
| [8] | 王永贵,陈永清,侯军生.先进复合材料构件波纹梁的成型工艺[J].航空制造技术,2005(07):64-67,79. |
| [9] | 陈立军,武凤琴,张欣宇,杨建,李荣先.环氧树脂/碳纤维复合材料的成型工艺与应用[J].工程塑料应用,2007(10):77-80. |
| [10] | 王共冬,刘文剑.复合材料成型工艺方法的模糊综合评判[J].材料科学与工艺,2008(01):66-69. |
| [11] | 陶宝祺;熊克;袁慎芳.智能材料结构[M].北京:国防工业出版社,1997:57. |
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%