高硬度装甲钢抗弹性能及其机理研究

兵器材料科学与工程 , 2010, 32(2): 76-78. doi: 10.3969/j.issn.1004-244X.2010.02.022

高硬度装甲钢抗弹性能及其机理研究

董立松 ^1, , 刘宁 ^2, , 辛士进 ^3, , 邸建辉 ^4, , 高平 ^5,

1.中国兵器科学研究院,宁波分院,内蒙古,包头,014034

2.中国兵器科学研究院,宁波分院,内蒙古,包头,014034

3.中国兵器科学研究院,宁波分院,内蒙古,包头,014034

4.中国兵器科学研究院,宁波分院,内蒙古,包头,014034

5.中国兵器科学研究院,宁波分院,内蒙古,包头,014034

关键词：抗弹性能 , 绝热剪切 , 冲塞

Study on ballistic performance and mechanism of high hardness armor steel

DONG Lisong ^1, , LIU Ning ^2, , XIN Shijin ^3, , DI Jianhui ^4, , GAO ping ^5,

1.中国兵器科学研究院,宁波分院,内蒙古,包头,014034

2.中国兵器科学研究院,宁波分院,内蒙古,包头,014034

3.中国兵器科学研究院,宁波分院,内蒙古,包头,014034

4.中国兵器科学研究院,宁波分院,内蒙古,包头,014034

5.中国兵器科学研究院,宁波分院,内蒙古,包头,014034

Keywords： ballistic performance , adiabatic shear , plugging

通过穿甲试验,研究装甲钢硬度与抗弹性能之间的关系;由弹坑解剖分析了装甲钢板穿甲破坏形貌以及弹坑表面的强化机理.试验结果表明:高硬度装甲钢抗弹性能好;装甲钢板为混合穿甲形式破坏;弹坑表面的变形带和相变带是由非常细小马氏体板条组成,其硬度非常高,远远高于装甲钢板的基体和淬火硬度.

By armor piercing test,the relationship between armor steel hardness and ballistic performance Wag studied.The damage appearance of the armor plate and the craters surface strengthening mechanism were analyzed.The result shows that high hardness armor steel has good ballistic performance and the damage pattern of armor plate is a mixed mode.The deformed band and transformed band are made up of very fine martensite laths,its hardness is much higher than that of the as-quenched specimen.

参考文献

[1]	Manganello S J;Abbott K H.Metallurgical factors affecting the ballisitic behaviour of steel targets[J].Journal Matenrials,1973(07):231-239.
[2]	付勇涛,刘静,刘武群,邱长生.装甲钢抗弹性能数学模型研究[J].兵器材料科学与工程,2007(05):54-58.
[3]	Morton ME;Waoolwardrl R L;马志青.装甲和弹的断裂破坏[J].兵器材料与力学,1983(02):42-48.
[4]	羡梦梅.装甲板的破坏和绝热剪切现象[J].兵器材料与力学,1980(01):28-39.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网