介绍38CrNi3MoV钢制厚壁圆筒模拟管的试制过程,对6支厚壁圆筒模拟管进行液压自紧和静压强度模拟试验.结果表明:在壁厚比1.6和1.65、自紧压力720～780 MPa、材料强度RR0.1≥1 280 MPa条件下,采用液压自紧工艺后6支厚壁圆筒模拟管实测静压强度达520～575 MPa,实测静压强度为理论静压强度的70%～76%.
参考文献
| [1] | Morrison J L M;Crossland B;Parry J S C .Strength of thick cylinders subjected to repeated internal pressure,ASME[J].Engineering for Industry,1960,82:143-153. |
| [2] | 马德林.断裂力学在常规兵器上的应用[J].兵器材料与力学,1980(01):8-46. |
| [3] | 才鸿年;张玉诚;徐秉业.火炮身管自紧技术[M].北京:兵器工业出版社,1997:16-17. |
| [4] | 任安峰 .火炮身管疲劳寿命研究[R].五二所科学技术报告,1991. |
| [5] | Bowie O L;Fresse C E.Elastic analysis for a radial crack in a circular ring[J].Engineering Fracture Mechanics,1972(04):315. |
| [6] | Andrasic C P;Parker A P.Stress intensity factors for extrnally and internally cracked pressurized thick cylinders with residu al and thermal stresses[M].Melbourne,Australia,1983:10-13. |
| [7] | Underwood J H.Stress and intensity factors for internally pressurized thick-walled cylinders[M].AD724641,1971 |
| [8] | Detale F;Endogan F.Stress intensity factors in a hollow cylinder containing radial crack[J].International Journal of Fracture,1982(20):251. |
| [9] | Tracy P G.Elastic analysis of radial cracks emanating from the outer and inner surfaces of a circular ring engaining[J].Fracture Mechanics,1979(11):29. |
| [10] | GB 6398-1986.GB 6398-1986.金属材料疲劳裂纹扩展速率试验方法[S].,1986. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%