中碳调质钢具有良好的强度与韧性匹配,在许多重要领域得到广泛的应用.综述中碳调质钢焊接热影响区的分布,脆化类型及机理,总结分析粗晶区和再热粗晶区的脆化原因及其防止措施,并指出中碳调质钢焊接热影响区研究的重点.
参考文献
[1] | 周振丰.焊接冶金学:金属焊接性[M].北京:机械工业出版社,1995:45-46. |
[2] | 李亚江;王娟;刘鹏.低合金钢焊接及工程应用[M].北京:化学工业出版社,2003:123-124. |
[3] | 熊庆人,高惠临,霍春勇,冯耀荣,赵新伟.X80管线钢焊接热影响区的韧性[J].机械工程材料,2007(04):29-33. |
[4] | Davis C L;King J E .Cleavage irutiation in the intercritically re-heated coarse-grained heat-affected zone:part Ⅰ.fractographic evidence[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1994,25(03):563-573. |
[5] | Qiu H;Mori H;Enoki M et al.Fracture mechanism and tough-ness of the welding heat-affected zone in structural steel under static and dynanuc loading[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,2000,31(11):2785-2791. |
[6] | 王宏,郑建军,刘翠荣.高强钢焊接接头组织遗传问题的研究[J].焊接技术,2000(02):5-6. |
[7] | 帅玉峰;闫子安;胡俊川.PCrN13Mo炮钢焊接过程中组织遗传现象的研究[J].焊接技术,1992(02):11-15. |
[8] | A. Lambert-Perlade;A.F. Gourgues;A. Pineau .Austenite to bainite phase transformation in the heat-affected zone of a high strength low alloy steel[J].Acta materialia,2004(8):2337-2348. |
[9] | C.L. DAVIS;J.E. KING .Cleavage Initiation in the Intercritically Reheated Coarse-Grained Heat Affected Zone: Part Ⅱ. Failure Criteria and Statistical Effects[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1996(10):3019-3029. |
[10] | Emin Bayraktar;Dominique Kaplan .Mechanical and metallurgical investigation of martensite--austenite constituents in simulated welding conditions[J].Journal of Materials Processing Technology,2004(0):87-92. |
[11] | 王学,常建伟,黄关政,任遥遥.WB36钢多层焊接头近缝区网状组织研究(Ⅱ):显微结构及韧性[J].材料热处理学报,2009(02):76-80. |
[12] | Liessem Andreas;Erdelen-peppler M.A critical view on the significance of HAZ toughness testing[A].Calgary,Alberta,Cana-da |
[13] | 高惠临,董玉华,冯耀荣.油、气管线钢的焊接局部脆化及其预防[J].机械工程学报,2001(03):14-19. |
[14] | Minanu F;Jing H.Stress/strain behavior of material including local hard zone[A].Clagary,New York:ASME,1992:73-80. |
[15] | 荆洪阳;霍立兴;张玉凤 等.马氏体一奥氏体组元形态对高强钢焊接热影响区韧性的影响[J].机械工程学报,1995,31(06):102-108. |
[16] | 柴锋,杨才福,张永权,徐洲.粒状贝氏体对超低碳含铜时效钢粗晶热影响区冲击韧性的影响[J].钢铁研究学报,2005(01):42-46. |
[17] | 王学,常建伟,黄关政,章应霖.WB36钢临界再热粗晶区组织性能[J].焊接学报,2008(10):29-32. |
[18] | DasC R;Albert S K;BhaduriA K et al.Effect of prior nucro-structure on microstructure and mechanical properties of mod-ified 9Cr-lMo steel weld joints[J].Materials Science and En-gineeringA,2008,477(1/2):185-192. |
[19] | 李宏伟,李立英,韩涛,杨浩.ASTM 4130钢的局部脆化研究[J].压力容器,2010(06):16-20. |
[20] | 李玉衡;包方涵 .低碳低合金调质钢模拟焊接HAZ组织遗传性及其对韧性的影响[J].焊接学报,1987,8(04):181-187. |
[21] | 钱鸣 .Cr-Ni-Mo中碳调质钢模拟焊接HAZ组织与韧性的研究[D].天津:天津大学,1992. |
[22] | 刘自成,张永嘉.焊接热影响区韧性劣化机理及防止的方法[J].世界钢铁,2004(04):15-20. |
[23] | Bonnevie E;Ferriere G;Ikhlef A;Kaplan D;Orain JM .Morphological aspects of martensite-austenite constituents in intercritical and coarse grain heat affected zones of structural steels[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):352-358. |
[24] | 陈玉华,王勇,韩彬.X70管线钢在役焊接局部脆化区的组织及精细结构[J].材料热处理学报,2007(01):79-82. |
[25] | 高惠临 .中碳调质钢焊接过热区强韧化研究[J].焊接学报,1994,15(02):107-112. |
[26] | 高惠临.35CrMo钢焊接粗晶区的回火处理[J].石油机械,1995(11):28. |
[27] | 陈忠孝;杨德新;刘继臣 .30CrMnSiNi2A超高强钢HAZ后热韧化抗裂机理的探讨[J].焊接学报,1983,4(03):14-23,54-55. |
[28] | 张莉莉,张骁勇,郝瑞辉,高惠临.回火焊道热处理对X80管线钢热影响区组织性能的影响[J].热加工工艺,2008(21):6-8,12. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%