研究了一种适合于制造轧机复合衬板的工作层材料,对衬板材料的化学组成、各种合金元素的作用及其加入量、衬板熔炼和轧制工艺进行了深入研究,衬板工作层材料经油淬和中温回火后,硬度大于HRC60,抗拉强度大于1 600 MPa,冲击韧性大于18 J/cm2,断裂韧性大于37 MPa·m0.5.应用于钢管热连轧机架上,耐磨性比堆焊衬板提高1倍以上.
参考文献
[1] | Schrama R C .Housing and Chock Clearances and Liner Materials for Steel Mill Rolling Mills[J].Lubrication Engineering,1994,50(06):438-447. |
[2] | 符寒光;黄兆军;宋锦春 .轧机机架衬板及其制造方法[P].CN 10108753.6,2003-10-28. |
[3] | Li Z G;Chang H B;Hsu T Y;Ruan X .Theoretical Prediction of the Kinetics Curves of Pearlitic Transformation in Hypo-proeutectoid Structural Steels[J].Acta Metallurgica Sinica (English Letters),1998,11(03):215-224. |
[4] | Oka M;Okamoto H.Morphology of Upper Bainites in Hypoeutectoid Plain Carbon Steels[A].Jan,1998:79-84. |
[5] | Masahide UMINO;Tomoaki SERA;Kunio KONDO .Effect of Silicon Content on Tempered Hardness, High Temperature Strength and Toughness of Hot Working Tool Steels[J].鉄と鋼,2003(6):673-679. |
[6] | Tomita Y. .EFFECT OF BAINITIC TRANSFORMATION ON MECHANICAL PROPERTIES OF 0.6C-SI-MN STEEL[J].Journal of Materials Science,1995(1):105-110. |
[7] | MASAKI TANEIKE;KOTA SAWADA;FUJIO ABE .Effect of Carbon Concentration on Precipitation Behavior of M_(23)C_6 Carbides and MX Carbonitrides in Martensitic 9Cr Steel during Heat Treatment[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,2004(4):1255-1262. |
[8] | Lee K B;Yoon S H;Kwon H .On the Transgranular Type of Tempered Martensite Embrittlement[J].Scripta Metallurgica et Materialia,1994,30(09):1111-1115. |
[9] | Iwamoto T;Hoshino T;Matsuzaki A;Amano K .Effects of Boron and Nitrogen on Graphitization and Hardenability in 0.53%C Steels[J].ISIJ International,2002,42(ZK):77-81. |
[10] | Yichuan Pan;Hua Yang;Xiangfa Liu .Effect of K/Na on microstructure of high-speed steel used for rolls[J].Materials Letters,2004(12/13):1912-1916. |
[11] | 祖方遒;黄小金;杨华 .碱金属元素对Fe-C铸造合金的改性作用[J].钢铁,1995,30(10):58-64. |
[12] | Yichuan Pan;Hua Yang;Xiangfa Liu .Effect of K/Na on microstructure of high-speed steel used for rolls[J].Materials Letters,2004(12/13):1912-1916. |
[13] | Yichuan Pan;Hua Yang;Xiangfa Liu .Effect of K/Na on microstructure of high-speed steel used for rolls[J].Materials Letters,2004(12/13):1912-1916. |
[14] | 祖方遒;黄小金;杨华 .碱金属元素对Fe-C铸造合金的改性作用[J].钢铁,1995,30(10):58-64. |
[15] | Yichuan Pan;Hua Yang;Xiangfa Liu .Effect of K/Na on microstructure of high-speed steel used for rolls[J].Materials Letters,2004(12/13):1912-1916. |
[16] | 祖方遒;黄小金;杨华 .碱金属元素对Fe-C铸造合金的改性作用[J].钢铁,1995,30(10):58-64. |
[17] | 符寒光,邢建东.变质处理M2铸造高速钢的组织和性能[J].航空材料学报,2003(01):7-10. |
[18] | Q. F. GUAN;Q. C. JIANG;J. R. FANG .Microstructures and Thermal Fatigue Behavior of Cr-Ni-Mo Hot Work Die Steel Modified by Rare Earth[J].ISIJ International,2003(5):784-789. |
[19] | Lan Jie;He Junjie;Ding Wenjiang;Wang Qudong, Zhu Yanping .Effect of Rare Earth Metals on the Microstructure and Impact Toughness of a Cast 0.4C-5Cr-1.2Mo-1.0V Steel[J].,2000,40(12):1275-1282. |
[20] | Ladenburg R W.Physical Measurements in Gas Dynamics and in Combustion[M].New York: Prince-ton University Press,1964:137-144. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%