Ti-IF钢多道次变形静态再结晶研究

1.武汉科技大学材料与冶金学院,湖北,武汉,430081

2.重庆大学材料科学与工程学院,重庆,400044

3.武汉科技大学材料与冶金学院,湖北,武汉,430081

4.武汉科技大学材料与冶金学院,湖北,武汉,430081

5.武汉科技大学材料与冶金学院,湖北,武汉,430081

Study on Static Recrystallization of Ti-IF Steels in Multi-pass Ferrite Deformation

在热模拟实验机上进行了Ti-IF钢多道次铁素体区变形实验,采用后插法确定了静态再结晶分数.在实验的基础上建立了超低碳Ti-IF钢多道次铁素体变形时静态再结晶动力学模型.研究结果表明,建立的超低碳Ti-IF钢多道次铁素体变形静态再结晶动力学模型与实验结果吻合.

[1]	Neutjens J;De Ball J B;Harlet Ph.The Use of Ferritic Rolling for the Production of Soft Steel Grades and Tin Plate Can Body Applications[A].ISS,1999:963-966.
[2]	毛新平.薄板坯连铸连轧铁素体轧制工艺[J].钢铁,2004(05):71-74.
[3]	M. R. BARN ETT .Distinctive Aspects of the Physical Metallurgy of Warm Rolling[J].ISIJ International,1999(9):856-873.
[4]	Zahiri SH;Byon SM;Kim SI;Lee Y;Hodgson PD .Static and metadynamic recrystallization of interstitial free steels during hot deformation[J].ISIJ International,2004(11):1918-1923.
[5]	Serajzadeh S .Prediction of flow behavior during warm working[J].ISIJ International,2004(11):1867-1873.
[6]	Barnert M R;Jonas J J .Influence of Ferrite Ro11ing Temperature on Grain Size and Texture in Annealed Low C and IF Stee[J].ISIJ International,1997,37(07):706-714.
[7]	S. F. MEDINA;J. E. MANCILLA .Influence of Alloying Elements in Solution on Static Recrystallization Kinetics of Hot Deformed Steels[J].ISIJ International,1996(8):1063-1069.
[8]	Devadas C;Samarasekera I V;Hawbolt E B .The Thermal and Metallurgical State of Steel Strip during Hot Rolling:Part Ⅲ.Microstructural Evolution[J].Metallurgical Tramsactions A,1991,22:335-348.
[9]	Andrade H J;Akben M G;Jonas J J .Effect of Molybdenum,Niobium,and Vanadium on Static Recrystallization and on Solute Strengthening in Microalloyed Steels[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1983,14(10):1967-1977.

上一张下一张

计量

作者相关

文章评分