欢迎登录材料期刊网

材料期刊网

中国科学院金属研究所 科学出版社
高级检索
  1. 首页
  2. 期刊
  3. 材料科学与工艺
  4. 金属基复合材料成形加工研究进展

材料科学与工艺, 2002, 10(2): 207-212. doi: 10.3969/j.issn.1005-0299.2002.02.025

金属基复合材料成形加工研究进展

李建辉 1, , 李春峰 2, , 雷廷权 3,

1.哈尔滨工业大学材料科学与工程学院,黑龙江哈尔滨,150001

2.哈尔滨工业大学材料科学与工程学院,黑龙江哈尔滨,150001

3.哈尔滨工业大学材料科学与工程学院,黑龙江哈尔滨,150001

基金项目:   国家重点基础研究发展计划(973计划)(G2000067206-3)  

关键词： 金属基复合材料 , 成形加工 , 塑性

Progress of research forming of metal matrix composites

金属基复合材料的发展极为迅速,应用越来越广泛.但是,金属基复合材料的塑性差,成形困难,成形性能的相关研究较少,阻碍了其实际应用.为此,综述了金属基复合材料的压缩变形、热挤压变形、高温超塑性变形的实验研究现状以及金属基复合材料的成形机理、相关有限元分析的理论研究新成果,提出了金属基复合材料产业化所面临的问题,同时展望了金属基复合材料成形加工的未来发展趋势.

参考文献

[1] Zhang Libin;Hai Jintao .Metal matrix composites in china[J].Journal of Materials Processing Technology,1998(1/3):1-5.
[2] 张文龙 .SiCw/Al复合材料大应变变形和再结晶[D].哈尔滨工业大学,1999.
[3] 贾玉玺.挤压加工对SiCp／Al复合材料组织和性能的影响[J].塑性工程学报,2000(04):5-8.
[4] 胡明,费维栋,姚忠凯,王德尊.非连续增强金属基复合材料的变形行为[J].宇航材料工艺,2001(01):10-14.
[5] CHAN K C;HAN B Q.Superplasticity deformation mechanisms of SiC whisker and particulate reinforced aluminium composites[A].,1997:479-485.
[6] Hirokuni Yamamoto;Hisashi Nishimura;Akihiro Miyazaki .Formability of superplastic aluminum alloy composites reinforced with SiC particles[J].Journal of Materials Processing Technology,2000(1/3):198-208.
[7] GENG L;HU J Q;LIU B.High temperature compressive deformation behavior of SiCw/6061Al composite at liquid-solid dual phase zone[A].,1997:550-555.
[8] NINOMIYA T;HIRA H;KANETAKE N.Superplastic forming of aluminum matrix composite sheets reinforced by SiC particles[A].,1997:198-204.
[9] WILL IAM C H J .Commercial processing of metal matrix composites[J].Materials Science and Engineering,1998,A244:75-79.
[10] TONGGQ;CHANKC .Deformation behavior of a PM Al6013/15SiCp Composite sheet at elevated temperature[J].Materials Letters,1999,38:326-330.
[11] K. C. Chan;B. Q. Han .High-strain-rate superplasticity of particulate reinforced aluminium matrix composites[J].International Journal of Mechanical Sciences,1998(2/3):305-311.
[12] 秦蜀懿.SiCp/LD2复合材料低塑性的因素研究[J].材料工程,1998(11):14.
[13] Kaczmar J.W.;Pietrzak K. .The production and application of metal matrix composite materials[J].Journal of Materials Processing Technology,2000(1/3):58-67.
[14] ALYN F H.Corporation-engineered products from metal matrix technologies[J].Light Metal Age,1999(04):48-61.
[15] 吴人洁.复合材料[M].天津:天津大学出版社,2000
[16] Nieh T G;HENSHALL C A;Wadsworth J .Superplasticity at high strain rates in a SiC whisker reinforced Al alloy[J].Scripta Metallurgica et Materialia,1984,18:1405-1410.
[17] LEDERICH D J;SASTRY S M L .Short communication:deformation behavior of silicon-carbide-whisker-reinforced aluminium composites[J].Materials Science and Engineering,1982,55:143-146.
[18] STANFORD-BEAIECA;CLYNETW .Extrusion and hightemperature deformation of fibre-reinforced aluminium composite[J].Composites Science and Technology,1989,35:121-157.
[19] Xu H.;Palmiere E.J. .Particulate refinement and redistribution during the axisymmetric compression of an AL/SiC_p metal matrix composite[J].Composites, Part A. Applied science and manufacturing,1999(3):203-211.
[20] RAKAND H J;HISKANEN P W.Deformation structures and flow stress in aluminium containing short whisker[J].Light Metal Age,1984(02):223-226.
[21] 吴昆 .SiCw/AZ91镁基复合材料的界面结构及时效行为[D].哈尔滨工业大学,1995.
[22] 岳珠峰;吕震宙;郑长卿 .颗粒增强金属基复合材料塑性响应的一种唯像模型[J].机械工程材料,1995,19:11-14.
[23] JUNG H K;CHEONG Y M;RYU H J et al.Analysis of anisotropy in elastic constants of SiCp/2124Al metal marix composites[J].Scripta Materialia,1999,41:1261-1267.
[24] Rees D W A .Deformation and fracture of metal matrix particulate composites under combined loading[J].Composites Part A:Applied Science and Manufacturing,1998,29:171-182.
[25] Dai L H;LING Z;BAI Y L .A strain gradient-strengthening law for particle reinforced metal matrix composites[J].Scripta Materialia,1999,41:245-251.
[26] Mishra R S;BIELER T R;MUKHERJEE A E .Mechanism of high strain rate superplasticity in aluminum alloy composites[J].Acta Materialia,1997,45:561-567.
[27] H. Ismar;F. Schroter;F. Streicher .Numerical modeling of the damage evolution in an aluminum alloy reinforced bidirectionally by ceramic fibers[J].Computational Materials Science,2000(1/4):304-312.
[28] M.M. Aghdam;D.J. Smith;M.J. Pavier .Finite element micromechanical modelling of yield and collapse behaviour of metal matrix composites[J].Journal of the Mechanics and Physics of Solids,2000(3):499-528.
[29] MCENTEE S P;BRADAIGH C M O .Large deformation finite element modeling of single-curvature composite sheet forming with tool contact[J].Composites Part A:Applied Science and Manufacturing,1998,29:207-213.
[30] KANG C G;KIM N H;KIM B M .The effect of die shape on the hot extrudability and mechanical properties of 6061Al/A12O3 composites[J].Journal of Materials Processing Technology,2000,100:53-62.
[31] Kim N H;KANG C G;KIM B M .Die design optimization for axisymmetrie hot extrusion of metal matrix composites[J].Mechanical Science,2001,43:1507-1520.
[32] Valiev R Z;ISLANMGALIV R K;Li Y et al.Strengthening and grain refinement in an Al-6061 metal matrix composite through intense plastic straining[J].Scripta Materialia,1999,40:117-122.
[33] Heness GL;Gan LH;Mai Y-W;Ben-Nissan B .Development of a finite element micromodel for metal matrix composites[J].Computational Materials Science,1999(4):259-269.
[34] Yilmaz S;ARAN A .Finite element analysis of the effect of particle alignment on the deformation behavior for a ductile matrix containing hard particles[J].Canadian Metallurgical Quarterly,1999,38:201-205.
[35] Qin, S;Zhang, G;Wang, W;Wang, Z;Chen, C .The effect of particle shape on ductility of SiCp reinforced 6061 Al matrix composites[J].Materials Science & Engineering. A, Structural Materials: Properties, Microstructure and Processing,1999(2):363-370.
[36] ROATIA A;BOLMARO R E .An Eshelby inclusion-based model for the study of stresses and plastic strain localization in metal matrix composites I: General formulation and its application to round particles[J].Materials Science and Engineering,1997,A229:182-191.
[37] E.O.Akser;K.-L.Choy .Finite element analysis of the stress distribution in a thermally and transversely loaded Ti-6Al-4V/SiC fibre composite[J].Composites, Part A. Applied science and manufacturing,2001(2):243-251.
[38] SAYMAN O .Elasto-plastic stress analysis in stainless steel fiber reinforced aluminum metal matrix laminated plates loaded transversely[J].Computers and Structures,1998,43:147-154.
[39] Nieh T G .Superplasticity in alloys and metal-matrix composites[J].Scripta Metallurgica et Materialia,1992,26:703-706.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
作者相关
文章评分
  • 您的评分：
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%

版权所有©2010中国科学院金属研究所中国科技出版传媒股份有限公司

本系统由北京仁和汇智信息技术有限公司设计开发

技术支持：info@rhhz.net