等离子喷涂是目前国内、外最常用的金属表面陶瓷涂层技术,但涂层的组织呈粗大的片层状、孔隙度较高、裂纹较多,且涂层与基材间为机械结合.等离子喷涂层的激光重熔为这一技术难题的解决提供了一条新的途径,使陶瓷材料的优异性能充分发挥出来.为此,综述了国内、外激光表面重熔等离子喷涂陶瓷涂层的研究现状,总结了等离子喷涂陶瓷涂层激光重熔后的组织特征与性能特点,分析了激光重熔过程中存在裂纹和剥落等问题的原因,提出了这些问题的解决途径,并展望了该项技术的应用前景.
参考文献
[1] | Mcpherson R .A review of microstructure and prop erties of plasma sprayed ceramic coatings[J].Surface and Coatings Technology,1999(39-40) |
[2] | Wang Y L .Friction and wear performances of detonation gun and plasma-sprayed ceramic and cerment hard coatings under dry friction[J].Wear,1993,161:69-78. |
[3] | CHEN H C;LIU Z Y;CHUANG Y C .Degradation of plasma-sprayed alumina and zirconia coatings on stain less steel during thermal cycling and hot corrosion[J].THIN SOLID FILMS,1992,223:54-56. |
[4] | Su Y L;LIN J S .Friction and wear behavior of a number of ceramic-coated steels matched as sliding pairs to various surface-treated steels[J].Wear,1993,166:27-35. |
[5] | 江志强,席守谋,李华伦.激光表面重熔等离子喷涂陶瓷涂层的研究与发展[J].材料工程,1999(01):46. |
[6] | 王爱华;谢长生;朱蓓蒂 等.激光技术改善等离子喷涂陶瓷层性质的研究与进展[J].激光技术,1995,9(02):124-128. |
[7] | IWAMOTE N;UMESAKI N .Surface treatment of plasma sprayed ceramic coatings by a laser beam[J].Surface and Coatings Technology,1988,34:59-67. |
[8] | Boas M;BAMBERGER M;REVEZ G .Laser-allo ying of plasma-sprayed WC/Co layer to enhance wear properties[J].Surface and Coatings Technology,1990,42:175-186. |
[9] | 李淑华;沈长林;邵德春 .激光表面重熔对等离子喷涂氧化铝陶瓷涂层耐腐蚀性的影响[J].材料科学与工艺,1994,2(03):72-76. |
[10] | JASIMLM;RAWLINGSRD;WESTDRF .Characterization of plasma-sprayed layers of fully ytteria stablized zirconia modified by laser sealing[J].Surface and Coatings Technology,1992,53:75-86. |
[11] | 陈传忠;于慧君;侯勇 等.W18Cr4V钢表面激光熔覆Al2O3陶瓷涂层的组织结构[J].陶瓷学报,1998,19(01):12-16. |
[12] | 吴秋红;陶曾毅;崔昆 等.激光重熔陶瓷层的显微组织和相结构[J].金属学报,1995,31(11):A508-A512. |
[13] | 陈传忠,王文中,曹怀华,孙毅,于家洪,雷廷权.激光熔覆Al2O3-NiCrAl层的脆性及摩擦磨损特性[J].中国激光,1999(09):841-846. |
[14] | 陈传忠,曹怀华,雷廷权.Al2O3-CoCrAlY 复合陶瓷激光熔覆层的组织与性能[J].硅酸盐学报,1999(04):445-451. |
[15] | JASIM K M;RAWLING R D;West D R F .Pulsed laser sealing of plasma-sprayed layers of 8 wt.% yt tria stabilized zircon[J].Journal of Materials Science,1992,27:3903-3910. |
[16] | PETITBON A;BOQUET L .Lsaer surface sealing and strengthening of zirconia coatings[J].Surface and Coatings Technology,1991,49:57-61. |
[17] | PETITBON A;GUIGNOT D;FISCHER U .Laser surface treatment of ceramic coating[J].Materials Science and Engineering,1989,A121:545-548. |
[18] | CUETOS J M;FERNANDEZ E;VIJANDE R .Plas ma-sprayed coatings treated with laser: tribological behaviour of Cr2O3[J].Wear,1993,169:173179. |
[19] | BELMONDO A;CASTAGNA M .Wear-resistant coating by laser processing[J].THIN SOLID FILMS,1979,64:249-256. |
[20] | 葛孝月;武晓雷;陈光南 .激光熔覆层陶瓷颗粒界面力学行为的数值分析[J].金属热处理学报,1998,19(03):26-28. |
[21] | 冯志刚.激光涂复层质量控制研究[J].激光杂志,1995(03):118. |
[22] | 李强 .激光溶覆不同碳化物颗粒/Ni-Cr-B-Si-C复合涂层的微观组织[D].哈尔滨工业大学,1998. |
[23] | 欧阳家虎 .激光熔覆Ni/TiCp复合涂层的组织结构及干滑动磨损行为[D].哈尔滨:哈尔滨工业大学,1994. |
[24] | 安世民;梅雨 .激光熔覆TiC/(Ni+Cr)复合粉涂层的显微组织[J].金属学报,1996,32(04):382-386. |
[25] | 裴宇韬;欧阳家虎;雷廷权 .激光熔覆金属/陶瓷复合涂层中陶瓷相的行为[J].材料导报,1995,9(04):60-66. |
[26] | Lawrence J;LI L .Effect of laser induced rapid solidification structure on adhesion and bonding char acteristics of alumina/silica based oxide to vitreous enamel[J].材料科学与工艺(英文版),2000,16(02):220-226. |
[27] | 杨元政,刘志国,刘正义.等离子喷涂Al2O3陶瓷涂层激光熔化深度的研究[J].激光技术,2000(05):312. |
[28] | 刘守渔,梁万国.等离子喷涂Al2O3+13wt%TiO2陶瓷涂层的 激光重熔处理[J].激光杂志,2000(01):46-47,50. |
[29] | Wang A;TAO Z;Zhu B .Laser modification of plasma-sprayed Al2O3-13wt. % TiO2 coating on a low carbon steel[J].Surface and Coatings Technology,1992,52:141-144. |
[30] | 陈汉存;刘正义;庄育智 .等离子喷涂ZrO2层经激光再熔后的组织变化[J].金属学报,1993,29(08):B358-362. |
[31] | JASIM M;RAWLINGS R D;West D R F .Stability of ZrO2 -Y2 O3 t/Phase formed during laser sealing[J].材料科学与工艺(英文版),1992,8(01):83-91. |
[32] | Taylor R;BRANDON R;MORRELL P .Micro structure, composition and relationships of plasmasprayed thermal barrier coatings[J].Surface and Coatings Technology,1992,50:141-149. |
[33] | 吴秋红;陶曾毅;崔昆.激光重熔工艺对热喷涂陶瓷层微观的影响[J].金属热处理,1995(07):7-10. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%