探讨机械球磨Cu-15%Cr复合粉末经真空烧结后采用热静液挤压致密化的可能性.研究了机械球磨时间、烧结温度、保温时间和挤压温度等工艺参数对材料致密化的影响.结果表明,热静液挤压工艺可以有效的促进机械球磨复合粉末的致密,所获得的材料具有优异的组织性能.
参考文献
| [1] | 赵冬梅,董企铭,刘平,金志浩,黄金亮.铜合金引线框架材料的发展*[J].材料导报,2001(05):18-20. |
| [2] | GhoshG;MIYAKE J;Fine M E .The systemsbased design of high - strength,high - conductivity alloys[J].Journal of The Minerals,Metals & Materials Society,1997,49(03):56. |
| [3] | Jin Y;ADACHI K;Takeuchi T et al.Correlation between the cold -working and aging treatments in a Cu -15 wt pct Cr in situ composite[J].Metallurgical and Materials Transactions,1998,29:2195. |
| [4] | B. S. Murty;S. Ranganathan .Novel materials synthesis by mechanical alloying/milling[J].International Materials Reviews,1998(3):101-141. |
| [5] | Morris D G;MORRIS M A .Rapid solidification and mechanical alloying techniques applied to Cu - Cr alloys[J].Materials Science and Engineering,1988,104:201. |
| [6] | LIU Jing-lei;LIU Zu-yan;WANG Er-de .Structures, properties and responses to heat treatment of deformation processed Cu-15 percent Cr composite powders prepared by mechanical milling[J].Transactions of Nonferrous Metals Society of China,2002(5):837-840. |
| [7] | Jin-Chun Kim;Sung-Soo Ryu;In-Hyung Moon .Nanostructural Characteristics and Sintering Behavior of W-Cu Composite Powder Prepared by Mechanical Alloying[J].Journal of advanced materials,1999(4):37-44. |
| [8] | 蔡一湘;刘伯武 .钨铜复合材料致密化问题和方法[J].粉末冶金技术,1999,17(02):138. |
| [9] | 柯尔巴什尼可夫A·N.金属材料的热液体挤压[M].北京:国防工业出版社,1984 |
| [10] | MAURICE D R;COURTNEY T H .The physics of mechanical alloying:a first report[J].Metallurgical and Materials Transactions,1990,21:289. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%