综述了作为碳化硅陶瓷烧结助剂的热力学条件及液相烧结的有效条件,介绍了碳化硅陶瓷烧结助剂的研究进展.
参考文献
[1] | Advanced Materials & Powders Handbook[J].American Ceramic Society bulletin,1999(6):69-81. |
[2] | LEE BURNS .Advanced materials & Powders Handbook[J].American Ceramic Society Bulletin,2000,79(06):52-53. |
[3] | 张宁,于文鑫,茹红强,吴进怡,孙旭东.SiC/YAG烧结工艺及铝钇比的研究[J].材料科学与工艺,2001(04):417-419. |
[4] | 郝寅雷,赵文兴.反应烧结碳化硅多相陶瓷制备方法研究进展[J].材料科学与工艺,2000(04):86-89. |
[5] | 李见.新型材料导论[M].北京:冶金工业出版社,1987 |
[6] | 刘玉莉;冯吉才;奈贺正明 .用Ti-Co合金液相扩散连接SiC陶瓷[J].哈尔滨工业大学学报,1998,30(06):61-64. |
[7] | 国家自然科学基金委员会.无机非金属材料科学[M].北京:科学出版社,1997 |
[8] | 理查德;J布鲁克;清华大学新型陶瓷与精细工艺国家重点实验室.陶瓷工艺,材料科学与技术丛书[M].北京:科学出版社,1999 |
[9] | 果世驹.粉末烧结理论[M].北京:冶金工业出版社,1998 |
[10] | KRISHI NEGITA .Effective sintering aids for siliconcarbide ceramics: reactivities of silicon carbide withvarious additives[J].Journal of the American Ceramic Society,1986,69(12):C308-310. |
[11] | 铃木弘茂;陈世兴.工程陶瓷[M].北京:科学出版社,1989 |
[12] | PROCHAZKA S.Sintering of silicon carbide[A].Brook Hill Publishing Co,1975:7-13. |
[13] | SIGEL LORENZ S;KLEEBE HANS-JOACHIM .Core/Rim structure of liquid-phase-sintered siliconcarbide[J].Journal of the American Ceramic Society,1993,76(03):773-776. |
[14] | PADTURE NITIN P .In situ-toughened silicon carbide[J].Journal of the American Ceramic Society,1994,77(02):519-523. |
[15] | Cao JJ.;Dejonghe LC.;Gilbert CJ.;Ritchie RO.;Moberlychan WJ. .IN SITU TOUGHENED SILICON CARBIDE WITH AL-B-C ADDITIONS[J].Journal of the American Ceramic Society,1996(2):461-469. |
[16] | Omori M;TAKEI H .Composite silicon carbide sintered shapes and its manufacturing[P].US:4502983,1985. |
[17] | Omori M;TAKEI H .Method for preparing sinteredshapes of silicon carbide[P].US:4564490,1986. |
[18] | CUTLER R A;JACKSON T B.Liquid phase sinteredsilicon carbide ceramic materials and components forengines[A].Westerville:American Ceramic Society,1989:309-318. |
[19] | CORDREY L;NIESZ D E;SHANEFIELD D J .Sintering of silicon carbide with rare-earth oxide additions[J].British Ceramic Transactions,1990,7:618-636. |
[20] | BOCKER W D G;HAMMINGER R J .Fortschrittebeim sintern kovalenter keramischer hochleistungwerkstoffe[J].Pulvermetallurgie in Wissenschaft undPraxis,1990,6:291-317. |
[21] | Mulla M A;KRSTIC V D .Low-temperature pressureless sintering of β-silicon carbide with aluminumoxide and yttrium oxide additions[J].American Ceramic Society Bulletin,1991,70:439-443. |
[22] | D. SCITI;A. BELLOSI .Effects of additives on densification, microstructure and properties of liquid-phase sintered silicon carbide[J].Journal of Materials Science,2000(15):3849-3855. |
[23] | 仓田正也;姜作义;马立.新型非金属材料进展[M].北京:新时代出版社,1987 |
[24] | KIM DO-HYEONG;KIM CHONG HEE .Tougheningbehavior of silicon carbide with additions of yttria andalumina[J].Journal of the American Ceramic Society,1990,73(05):1431-1434. |
[25] | MAGNANI G;MINOCCARI;L G L .PILOTTI L.Flexural strength and toughness of liquid phase sintered silicon carbide[J].Ceramics International,2000,26:495-500. |
[26] | J. Forster;R. VaBen;D. Stover .Improvement of fracture toughness in hot isostatically pressed mixtures of ultrafine and coarse-grained SiC ceramics[J].Journal of Materials Science Letters,1995(3):214-216. |
[27] | Foster D;THOMPSON D P .The use of MgO as adensification aide for α-SiC[J].Journal of the European Ceramic Society,1999,19:2823-2831. |
[28] | KIM JAE-YUK;ISEKI TAKAYOSHI .Pressurelesssintering of dense Si3N4 and Si3N4/SiC compositeswith nitrate additions[J].Journal of the American Ceramic Society,1996,79(10):2744-2746. |
[29] | Dae-Chul Park;Toyohiko Yano .Effect of Nitrate Salts as Sintering Additives during the Ball-Milling Process of Silicon Nitride Powders[J].Journal of the American Ceramic Society,2000(12):2967-2973. |
[30] | Vassen R.;Forster J.;Buchkremer HP.;Stover D.;Kaiser A. .DENSIFICATION OF ULTRAFINE SIC POWDERS[J].Journal of Materials Science,1996(14):3623-3637. |
[31] | Vassen Robert .Processing and Properties of Nanograin Silicon Carbide[J].Journal of the American Chemical Society,1999(10):2595-2893. |
[32] | Groza JR .Nanosintering[J].Nanostructured Materials,1999(5/8):987-992. |
[33] | 李广海,张立德.纳米添加氧化铝陶瓷[C].'96中国材料研讨会论文集(功能材料),1996:187~190. |
[34] | 张立德.纳米材料研究的现状和发展趋势[C].'96中国材料研讨会论文集(功能材料),1996:2~6. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%