蠕变性能是影响钎焊接头可靠性的重要指标之一.采用搭接面积为1 mm2的单搭接钎焊接头,在恒定载荷下,测定了Cu颗粒增强锡铅基复合钎料钎焊接头的蠕变寿命,分析并讨论了温度对该复合钎料蠕变寿命的影响.结果表明:Cu颗粒增强的锡铅基复合钎料的蠕变抗力优于传统63Sn37Pb共晶钎料;钎焊接头蠕变寿命随温度的升高而降低,并且温度对复合钎料钎焊接头蠕变寿命的影响较传统63Sn37Pb钎料明显.
参考文献
[1] | GuoF;LUCAS J P;SUBRAMANIAN K N .CreepbehaviorinCuandAgparticles-reinforcedcompositeandeutecticSn-35AgandSn-40Ag-05Cunon-compositesolderoints[J].Journal of Materials Science,2001,12(01):27-35. |
[2] | ChoiS;LEE J;GUO F et al.CreeppropertiesofeutecticSn-AgsolderandSn-Agcompositesolderscontaininginteimetallicparticles[J].Journal of Electronic Materials,2001,53(06):22-26. |
[3] | H. Mavoori;S. Jin .Significantly enhanced creep resistance in low-melting-point solders through nanoscale oxide dispersions[J].Applied physics letters,1998(13/18):2290-2292. |
[4] | H.G. Song;J.W. Morris Jr.;F. Hua .The Creep Properties of Lead-Free Solder Joints[J].JOM,2002(6):30-32. |
[5] | C.G. KUO;S.M.L. SASTRY;K.L. JERINA .Creep-Fatigue Life Prediction of In Situ Composite Solders[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1995(12):3265-3275. |
[6] | DieterGE.Mechanical Metallurgy[M].America:PergamonPress,1986 |
[7] | RAEDER C H;SCHMEELK G D;MITLIN D.Isothermal creep of eutectic Sn - Bi and Sn - Ag solder and solder joints[A].,1994:113-125. |
[8] | REYNOLDS H.L.;KANG S.H.;MORRIS J.W. .The Creep Behavior of In-Ag Eutectic Solder Joints[J].Journal of Electronic Materials,1999(1):69-75. |
[9] | 史耀武;闫焉服;刘建萍 等.金属颗粒增强的锡铅基复合钎料及其制备方法[P].CN:01144487,2001-08. |
[10] | 闫焉服,周国峰,刘建萍,史耀武,夏志东.增强颗粒Cu对锡铅基复合钎料铺展性能的影响[J].焊接技术,2003(05):42-44. |
[11] | 冯端.金属物理学(第三卷:金属力学性质)[M].北京:科学出版社,1999 |
[12] | MEIZ;SHINE M C .Fatigueliveson60Sn/40Pbsolderjointsmadewithdifferentcoolingrates[J].ASME Journal of Electronic Packaging,1992,114(02):104-108. |
[13] | MEIZ;GRIVAS D;SHINE M C et al.Superplasticcreepofeutectictin-leadsolderjoints[J].Journal of Electronic Materials,1990,19(11):1273-1280. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%