针对碳纤维/环氧预浸布复合材料的耐折叠性能特点,进行了不同折叠半径和不同折叠时间力学性能的对比实验.选定折叠时间为4h,折叠半径取0-4mm.再以折叠半径0.5mm为条件,取折叠时间为1-4h.对不同折叠条件下的试件进行拉伸性能试验、从而得出不同折叠半径,不同折叠时间对复合材料预浸布性能的影响.实验结果表明:折叠造成了复合材料增强纤维的损伤和树脂的堆积,引起了拉伸性能的下降,折叠半径越小、折叠时间越长,碳纤维/环氧预浸布薄膜复合材料强度下降越严重.
参考文献
| [1] | Beauchmanp P M;RODGERS D H .New Concepts for Inflatable Structures Applied to Spaceborne Radars[R].AIAA-95-3795:1-8 |
| [2] | Malone P K;WILLIAMS G T .Lightweight Inflatable Solar Array[J].Journal of Propulsion and Power,1996,12:1. |
| [3] | Cadogan D P;LINGO R W;SANDY C R .Proof-Of-Concept Demonstration Model of the Infaltable RollUp Synthetic Aperture Radar Array Antenna[R].ILC Dover Final Report for JPL Contract,1997. |
| [4] | GUHA S.Recent Progress in Amorphous Silicon Alloy Leading to 13% Stable Cell Efficiency[A].,1997:5-6. |
| [5] | Costa Cassapakis;Mitch Thomas .Inflatable Structures Technology Development Overview[R].AIAA-95-3738:1-10 |
| [6] | Cadogan D P;SCARBOROUGH S E .Rigidizable Materials for Use in Gossamer[R].AIAA |
| [7] | Jeffrey F.LIGHTWEIGHT,FLEXIBLE,Monolithic Thin-Film Amorphous Silicon Modules on Continuous Polymer Substrates[J].International Journal of Solar Energy,1996:205-212. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%