欢迎登录材料期刊网

材料期刊网

高级检索

采用显微组织观察的方法研究了Ti-Al-Nb-W-B合金在1265℃,18h热处理过程中的组织演变规律.对合金的铸态、均匀化处理态合金及1265℃,18 h热处理态微观组织进行了观察,研究了钨含量与Ti-Al-Nb-W-B合金热处理微观组织演变的关系.结果表明:热处理态组织的层片特征弱化,γ片增厚,而体积分数减少,α2片则增厚更多,且体积分数增多.当合金中钨含量不同,其组织中的晶团尺寸出现差异,随着钨含量的增加,晶团尺寸减小,但减小的程度较小;白色点状的β(B2)相析出,呈弥散分布;随着钨含量的增加,β(B2)析出相的数量有增加的趋势,且更多地分布在晶界,尤其在晶界的交角处,析出相可有效钉扎晶团长大:在1265℃保温时,非连续长大非常缓慢.

参考文献

[1] LIU C T .Recent advances in ordered intermetallics[J].MATERIALS CHEMISTRY AND PHYSICS,1995,42(02):77-86.
[2] F. Appel;M. Oehring .Novel design concepts for gamma-base titanium aluminide alloys[J].Intermetallics,2000(9/11):1283-1312.
[3] HODGE A M;HSIUNG LM;NIEH T G .Creep of neady lamellar TiAl alloy containing W[J].Scripts Materialia,2004,51(05):411-415.
[4] S. Zghal;M. Thomas;S. Naka .Phase transformations in TiAl based alloys[J].Acta materialia,2005(9):2653-2664.
[5] Kumpfert J.;Dimiduk DM.;Kim YW. .EFFECT OF MICROSTRUCTURE ON FATIGUE AND TENSILE PROPERTIES OF THE GAMMA TIAL ALLOY TI-46.5AL-3.ONB-2.1CR-0.2W[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1995(0):465-473.
[6] D. Hu .Effect of boron addition on tensile ductility in lamellar TiAl alloys[J].Intermetallics,2002(9):851-858.
[7] T.T. Cheng .The mechanism of grain refinement in TiAl alloys by boron addition --an alternative hypothesis[J].Intermetallics,2000(1):29-38.
[8] GERLING R;BARTELS A;CLEMENS H et al.Struetural characterization and tensile properties of a hish niobium containing gamma TiAl sheet obtained by powder metallurgical processing[J].Intermetallies,2004,12(03):275-280.
[9] LARSON D J;LIU C T;MILLER M K .Tungsten segregation in α2+γ titanium aluminides[J].Intermetallics,1997,5(07):497-500.
[10] MAZIASZ P J;LIU C T .Development of ultrafine lamellar structures in two γ-TiAl alloys[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1998,29A:105-117.
[11] BEDDOES J;ZHAO L;WALLACE W .High temperature compression behaviour of nearγ-titanium aluminides containing additions of chromium or tungsten[J].MATERIAL SCIENCE AND ENGINEERING,1994,A184:L11-L15.
[12] MAZIASZ P J;RAMANUJAN R V;LIU C T et al.Effects of B and W alloying additions on the formation and stability of lamellar structures in two-phase γ-TiAl[J].Intermetallics,1997,5(02):83-95.
[13] Kim HY.;Hong SH.;Sohn WH. .High temperature deformation of Ti-(46-48)A1-2W intermetallic compounds[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):216-225.
[14] 刘自成,林均品,陈国良.添加W对高铌TiAl合金组织和力学性能的影响[J].材料热处理学报,2001(01):7-13.
[15] 高文理,张虎,张二林,曾松岩.TiAl-B合金中TiB2微观形态的主要存在方式[J].铸造技术,2003(03):176-178.
[16] 高文理,张虎,何建平,金云学,曾松岩.TiAl-B合金细棒状十字形TiB2的生长特征[J].稀有金属材料与工程,2003(03):179-182.
[17] 孔凡涛,董孟环,陈玉勇.Ti-47Al-1.2Ce合金显微组织及稀土相[J].中国稀土学报,2002(01):72-73.
[18] A.DENQUIN;S.NAKA .PHASE TRANSFORMATION MECHANISMS INVOLVED IN TWO-PHASE TiAl-BASED ALLOYS-I. LAMELLAR STRUCTURE FORMATION[J].Acta materialia,1996(1):343-352.
[19] A.DENQUIN;S.NAKA .PHASE TRANSFORMATION MECHANISMS INVOLVED IN TWO-PHASE TiAl- BASED ALLOYS-II. DISCONTINUOUS COARSENING AND MASSIVE-TYPE TRANSFORMATION[J].Acta materialia,1996(1):353-365.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%