低压注射成型(LPIM)是高效、经济的近净形成型工艺.综述了LPIM工艺的特点及其优势,总结了LPIM的发展研究状况,并对其发展前景作了展望.
参考文献
[1] | 理查德 J 布鲁克.陶瓷工艺(Ⅰ)[M].北京:科学出版社,1999 |
[2] | 范景莲;黄伯云;李益民 等.影响PIM发展的关键因素[J].粉末冶金技术,1998,16(03):217-222. |
[3] | LII Ding-fwn .The effects of atmosphere on the thermal debinding of injection moulded Si3N4 components[J].Ceramics International,1998,24:99-104. |
[4] | Lenk R.;Alexander P. .Effect of Surface-Active Substances on the Rheological Properties of Silicon Carbide Suspensions in Paraffin[J].Journal of the American Ceramic Society,2000(2):273-276. |
[5] | Anders F.Henriksen .The art of forming near net shapes[J].Ceramic Industry,1997(4):90-92. |
[6] | MANGELS J A .Low-Pressure Injection Molding[J].AMERICAN CERAMIC SOCIETY OF BULLETIN,1994,73(05):37-41. |
[7] | Thierry Chartier;Eric Delhomme;Jean F. Baumard;Philippe Marteau;Pascale Subra;Roland Tufeu .Solubility, in Supercritical Carbon Dioxide, of Paraffin Waxes Used as Binders for Low-Pressure Injection Molding[J].Industrial & Engineering Chemistry Research,1999(5):1904-1910. |
[8] | Sajko M.;Dirscherl R.;Janssen R.;Kosmac T. .MICROSTRUCTURE AND MECHANICAL PROPERTIES OF LOW-PRESSURE INJECTION-MOULDED REACTION-BONDED ALUMINA CERAMICS[J].Journal of Materials Science,1997(10):2647-2654. |
[9] | KOSMAC T .Low pressure injection moulding of SiC platelet reinforced reaction bonded silicon nitride[J].Journal of Materials Science,1997,32:469-474. |
[10] | NOVAK S;VIDOVIC K;SAJKO M et al.Surface modificaton of alumina powder for LPIM[J].Journal of the European Ceramic Society,1997,17:217-223. |
[11] | A.J. Millan;R. Moreno;M.I. Nieto .Aqueous injection moulding of alumina using agarose[J].Materials Letters,2001(6):324-328. |
[12] | 李松林;曲选辉;李益民 等.金属注射成型水溶性粘结剂的研究[J].材料科学与工艺,1999,7(04):12-15. |
[13] | MILLAN A J;NIETO M I;MORENO R .Aqueous injeetion moulding of silicon nitride[J].Journal of the European Ceramic Society,2000,20:2661-2666. |
[14] | MILLAN A J;BRAVO M;MORENO R et al.Rheological characterization of Al2O3 sLip for aqueous low pressure injection moulding[J].BRITISH CERAMIC TRANSACTIONS,2000,99(02):92-95. |
[15] | Jerry C. LaSalle .Aqueous binder allows economic net shape processing of larger MIM parts[J].Metal Powder Report,2000(6):26-31. |
[16] | 颜鲁婷,司文捷,苗赫濯.CIM中最新脱脂工艺的进展[J].材料科学与工程,2001(03):108-112. |
[17] | 李益民,曲选辉,黄伯云,曾舟山,朱磊.多聚合物组元石蜡基MIM粘结剂的分步快速脱脂过程[J].稀有金属材料与工程,2000(01):46-49. |
[18] | 李松林,梁叔全,李笃信,李益民,张传福,黄伯云.粉末注射成形溶剂一热二步法脱脂过程变形的研究[J].粉末冶金技术,2003(02):76-79. |
[19] | 李笃信,黄伯云,曲选辉,李益民,林健凉,冯一雷.新型金属注射成形催化脱脂型粘结剂的催化快速分解研究[J].材料科学与工艺,2001(03):256-258. |
[20] | KIM Sang-woo;LEE Hae-weon;SONG Huesup .Effect of minor binder on capillary structure evolution during wicking[J].Ceramics International,1999,25:671-676. |
[21] | 李新军,吕海波,石西昌.粉末注射成形低温热脱蜡的非等温动力学[J].中国有色金属学报,1997(03):112-115. |
[22] | Zorzi JE.;Perottoni CA.;Da Jornada JAH. .Hard-skin development during binder removal from Al2O3-based green ceramic bodies[J].Journal of Materials Science,2002(9):1801-1807. |
[23] | HSU K C;LIN C C;LO G M .The effeet of wax composition ou the injection molding of carbonyl iron powder with LDPE[J].CANADIAN METALLURGICAL QUARTERLY,1996,35(02):181-187. |
[24] | SUPATI R;LOH N H;KHOR K A et al.Mixing and characterization of feedstock for powder injection molding[J].Materials Letters,2000,46:109-114. |
[25] | Lenk R.;Alexander P. .Effect of Surface-Active Substances on the Rheological Properties of Silicon Carbide Suspensions in Paraffin[J].Journal of the American Ceramic Society,2000(2):273-276. |
[26] | Liu DM.;Tseng WJ. .Yield behavior of zirconia-wax suspensions[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):136-146. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%