利用热梯度化学气相沉积工艺制备了炭/炭复合材料,研究了热处理温度对炭/炭复合材料石墨化度、硬度和摩擦性能的影响.结果表明:随着热处理温度的升高,炭/炭复合材料的石墨化度增加,石墨片层的间距d002逐渐减小,石墨微晶的厚度LC逐渐增大,炭/炭复合材料的硬度降低.随石墨化度的增加,有更多的石墨微品碎片参与摩擦而形成摩擦表面膜,这些石墨碎片会填充摩擦表面的犁沟,使凹凸不平的摩擦面变得平整光滑,从而使摩擦系数减小、刹车力矩降低,刹车时间延长.
参考文献
[1] | SAVAGE G.Carbon-Carbon Composites[M].London:Champman & Hall Press,1994 |
[2] | Jian-guo Zhao;Ke-zhi Li;He-jun Li .The influence of thermal gradient on pyrocarbon deposition in carbon/carbon composites during the CVI process[J].Carbon: An International Journal Sponsored by the American Carbon Society,2006(4):786-791. |
[3] | GOLECKI I .Rapid vapor-phase densification of refractory composites[J].Materails Science and Engineering R,1997,R20:37-124. |
[4] | Yen BK.;Ishihara T. .AN INVESTIGATION OF FRICTION AND WEAR MECHANISMS OF CARBON-CARBON COMPOSITES IN NITROGEN AND AIR AT ELEVATED TEMPERATURES[J].Carbon: An International Journal Sponsored by the American Carbon Society,1996(4):489-498. |
[5] | CHEN J D;CHEM LIN J H;JU C P .Effect of humidity on the tribological behavior of carbon-carbon composites[J].Wear,1996,193:38-47. |
[6] | CHEN J D;JU C P .Effect of sliding speed on the tribological behavior of a PAN-pitch carbon-carbon composite[J].Materials Chemistry and Physics,1995,39:174-179. |
[7] | Toby J. Hutton;David Johnson;Brian McEnaney .Effects of fibre orientation on the tribology of a model carbon-carbon composite[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(8):647-655. |
[8] | Christopher Byrne;Zhiyuan Wang .Influence of thermal properties on friction performance of carbon composites[J].Carbon: An International Journal Sponsored by the American Carbon Society,2001(12):1789-1801. |
[9] | Ju CP.;Lee KJ.;Kuo HH.;Lin JHC. .Multi-braking tribological behavior of PAN-pilch, PAN-CVI and pitch-resin-CVI carbon-carbon composites[J].Materials Chemistry and Physics,2000(3):196-214. |
[10] | Ruiying Luo;Jianwei Qu;Haiying Ding .Static friction properties of carbon/carbon composites[J].Materials Letters,2004(7/8):1251-1254. |
[11] | Hutton Toby J.;McEnaney Brian;Crelling John C. .Structural studies of wear debris from carbon-carbon composite aircraft brakes[J].Carbon: An International Journal Sponsored by the American Carbon Society,1999(6):907-916. |
[12] | J. R. Gomes;O. M. Silva;C. M. Silva;L. C. Pardini;R. F. Silva .The effect of sliding speed and temperature on the tribological behaviour of carbon-carbon composites[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(3/4):240-245. |
[13] | B. Venkataraman;G. Sundararajan .The influence of sample geometry on the friction behaviour of carbon-carbon composites[J].Acta materialia,2002(5):1153-1163. |
[14] | Hyun-kyu Shin;Hong-Bum Lee;Kwang-Soo Kim .Tribological properties of pitch-based 2-D carbon-carbon compsites[J].Carbon: An International Journal Sponsored by the American Carbon Society,2001(7):959-970. |
[15] | 罗瑞盈;杨峥;李贺军 等.高温处理对碳/碳复合材料摩擦学性能影响[J].复合材料学报,1996,16(04):47-53. |
[16] | 徐惠娟,熊翔,黄伯云,吉冬英,陈腾飞.石墨化度对炭/炭复合材料在不同制动速度下的摩擦磨损性能的影响[J].矿冶工程,2003(04):71-74. |
[17] | Ruiying Luo;Xiulan Huai;Jianwei Qu;Haiying Ding;Songhua Xu .Effect of heat treatment on the tribological behavior of 2D carbon/carbon composites[J].Carbon: An International Journal Sponsored by the American Carbon Society,2003(14):2693-2701. |
[18] | 冯志荣,黄启忠,邹林华.石墨化度对C/C复合材料摩擦性能的影响[J].粉末冶金工业,2000(03):29-32. |
[19] | 李克智,赵建国,李爱军,李贺军.热梯度CVI技术制备炭/炭复合材料[J].材料科学与工艺,2005(05):449-451. |
[20] | 赵建国,李克智,李贺军,席琛,白瑞成,张秀莲.热处理温度对炭/炭复合材料性能的影响[J].材料热处理学报,2005(01):1-4. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%