欢迎登录材料期刊网

材料期刊网

高级检索

为了突出合金元素对再结晶模型的影响,以Avrami方程为动力学基础,对现有模型进行修正,建立了热变形奥氏体再结晶动力学模型,确定动态、静态再结晶分数与温度、变形条件和化学成分的函数关系,并采用单道次和双道次压缩实验验证了Si-Mn钢和Nb-V钢再结晶动力学模型.结果表明:低合金和微合金元素均能抑制再结晶的发生,使流变应力增高;计算值和测量值吻合得很好,充分证明了模型的准确性.

参考文献

[1] F.Siciliand Jr. K.Minami .Mathermatical Modeling of the Mean Flow Stress, Fractional Softening and Grain Size during the Hot Strip Rolling of C-Mn Steels[J].ISIJ International,1996(12):1500-1506.
[2] BEYNON J H;SELLARS C M .Modelling microstructure and its effects during multipass hot rolling[J].ISIJ International,1992,32(03):359-367.
[3] SIWECKI T .Modelling of microstructure evolution during recrystallization controlled rolling[J].ISIJ International,1992,32(03):368-376.
[4] Sang-Hyun CHO;Ki-Bong KANG;John J. JONAS .The Dynamic, Static and Metadynamic Recrystallization of a Nb-microalloyed Steel[J].ISIJ International,2001(1):63-69.
[5] DUTTA B;SELLARS C M .Effect of Composition and process variables on Nb(C,N) precipitation in Niobium microalloyed austenite[J].Materials Science and Technology,1987,3(03):197-206.
[6] A.I. Fernandez;P. Uranga;B. Lopez .Dynamic recrystallization behavior covering a wide austenite grain size range in Nb and Nb-Ti microalloyed steels[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):367-376.
[7] S.F.MEDINA;C.A.HERNANDEZ .MODELLING OF THE DYNAMIC RECRYSTALLIZATION OF AUSTENITE IN LOW ALLOY AND MICROALLOYED STEELS[J].Acta materialia,1996(1):165-171.
[8] S. F. MEDINA;J. E. MANCILLA .Static Recrystallization Modelling of Hot Deformed Steels Containing Several Alloying Elements[J].ISIJ International,1996(8):1070-1076.
[9] CABRERA M;JONAS JJ;PRADO J M .Effect of the chemical composition on the peak and steady stress of plain carbon and microalloyed steels deformed under hot working conditions[J].Materials Science Forum,1998,284-286:127-134.
[10] S.F.MEDINA;C.A.HERNANDEZ .THE INFLUENCE OF CHEMICAL COMPOSITION ON PEAK STRAIN OF DEFORMED AUSTENITE IN LOW ALLOY AND MICROALLOYED STEELS[J].Acta materialia,1996(1):149-154.
[11] MEDINA S F;HERNANDEZ C A .General expression of the zener-hollomon parameters as a function of the chemical composition of low alloy and microalloyed steels[J].Acta Materials,1996,44(01):137-148.
[12] 江坂一彬;脇田淳一;高橋学 .材質予測制御モデルの開発[J].钢铁研究,1986,321:92-104.
[13] S. F. MEDINA;J. E. MANCILLA .Influence of Alloying Elements in Solution on Static Recrystallization Kinetics of Hot Deformed Steels[J].ISIJ International,1996(8):1063-1069.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%