直接凝固注模成型(DCC)是利用陶瓷浆料粘度变化制备陶瓷坯体的先进成型方法,脱模时问长是限制其应用的主要问题.通过调整DCC工艺参数,减小充模前浆料的粘度以利于成形,而在充模后使浆料的粘度迅速增加,缩短脱模时间.将高固含量(体积分数为70%)低粘度的陶瓷浆料浇注到模具中,通过改变浆料的pH值或浆料离子浓度来改变其胶体化学行为,调节浆料流动性能;通过温度控制加速浆料凝固,使充模后10 min的浆料粘度与充模前浆料粘度比值达到13,3倍于传统浆料成型方法,充模后1 h即可得到有足够脱模强度的陶瓷坯体,效率显著提高.
参考文献
| [1] | 李懋强.关于陶瓷成型工艺的讨论[J].硅酸盐学报,2001(05):466-470. |
| [2] | GIIAULE L J;BAADER F H;GAUCKLER L J .Shaping of ceramic green compacts directfrom suspensions by enzyme catalyzed reactions[J].Scientific Forum DKG,1994,71(06):317-323. |
| [3] | 高濂 .直接凝固注模成型技术[J].无机材料学报,1998,13(03):271-274. |
| [4] | PUGH R J;BERGSTROM L.Surface and colloid chemistry in advanced ceramic processing[M].New York,1994 |
| [5] | GAUCKLER L J;GRAULE Th;BAADER F .Ceramic forming using enzyme catalyzed reactions[J].Materials Chemistry and Physics,1999,61:78-102. |
| [6] | 刘学建,黄莉萍,古宏晨,徐鑫,符锡仁.直接凝固注模成型氮化硅陶瓷[J].无机材料学报,2001(05):877-882. |
| [7] | Jung YS.;Paik U.;Pagnoux C.;Jung YG. .Consolidation of aqueous concentrated silicon nitride suspension by direct coagulation casting[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):93-100. |
| [8] | BALZER B;HRUSCHKA M K M;GAUCKLER L J .Coagulation kinetics and mechanical behavior of wet alumina green bodie++produced via DCC[J].Journal of Colloid and Interface Science,1999,216:379-386. |
| [9] | 司文捷 .直接凝同注模成型SiC陶瓷-浆料凝同过程的研究[J].无机材料学报,1996,11(01):171-174. |
| [10] | Wei Li;Hongxiang Zhang;Yanping Jin .Rapid coagulation of silicon carbide slurry via direct coagulation casting[J].Ceramics International,2004(3):411-416. |
| [11] | 谢志鹏;杨金龙;黄勇 等.陶瓷直接凝固注模成型(DCC)原理与应用[J].陶瓷学报,1997,18(03):167-171. |
| [12] | Wenjie Si;Thomas J. Graule;Felix H. Baader;Ludwig J. Gauckler .Direct coagulation casting of silicon carbide components[J].Journal of the American Ceramic Society,1999(5):1129-1136. |
| [13] | 谢志鹏,黄勇,陈亚丽,杨金龙.酶催化明胶原位凝固成型陶瓷坯体的研究上[J].硅酸盐学报,1999(05):527-532. |
| [14] | VINCENT B .Phase separation in dispersions of weakly interacting particles[J].Chemical Engineering Seience,1987,42(04):779-786. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%